mirror of
https://github.com/Lienol/openwrt
synced 2025-01-07 03:06:49 +08:00
ipq806x: Add support for Xiaomi Mi Router HD (R3D)
Xiaomi R3D is a 2.4/5 GHz band 11ac router, based on IPQ8064. Specification: * SoC: Qualcomm IPQ8064 * RAM: 512MB DDR3 * Flash: 256MB NAND (Macronix MX30UF2G18AC-TI) * Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN) * WiFi: Qualcomm QCA9984 (5GHz, 4T4R, n/ac) * WiFi: Qualcomm QCA9980 (2.4GHz, 4T4R, b/g/n) * USB: 1x 3.0 * SATA: 1x SATA 3.1 (only for internal HDD 3.5") * BTN: Power, Reset * LEDS: Status(Green/Blue/Red) * UART: present as 4-pads on the PCB (3.3V, 115200-8-N-1) MAC addresses as verified by stock firmware: | Interface | MAC | ART | Format | |-------------+-------------------+---------+--------| | WAN (label) | xx:xx:xx:xx:xx:B2 | 0x0 | binary | | LAN | xx:xx:xx:xx:xx:B3 | 0x6 | binary | | WiFi 2g | xx:xx:xx:xx:xx:B4 | 0x1006 | binary | | WiFi 5g | xx:xx:xx:xx:xx:B5 | 0x5006 | binary |
This commit is contained in:
parent
6b2fa7aa80
commit
99c436fc4f
@ -45,6 +45,10 @@ qcom,ipq8064-ap148 |\
|
||||
qcom,ipq8064-db149)
|
||||
ubootenv_add_uci_config $(ubootenv_mtdinfo)
|
||||
;;
|
||||
xiaomi,r3d)
|
||||
ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000"
|
||||
ubootenv_add_uci_sys_config "/dev/mtd12" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
ubnt,unifi-ac-hd |\
|
||||
zyxel,nbg6817)
|
||||
ubootenv_add_uci_config "/dev/mtdblock9" "0x0" "0x10000" "0x10000"
|
||||
@ -52,6 +56,6 @@ zyxel,nbg6817)
|
||||
esac
|
||||
|
||||
config_load ubootenv
|
||||
config_foreach ubootenv_add_app_config ubootenv
|
||||
config_foreach ubootenv_add_app_config
|
||||
|
||||
exit 0
|
||||
|
@ -72,6 +72,10 @@ tplink,ad7200)
|
||||
ubnt,unifi-ac-hd)
|
||||
ucidef_set_interface_lan "eth0 eth1"
|
||||
;;
|
||||
xiaomi,r3d)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:3" "2:lan:2" "3:lan:1" "6@eth1" "5:wan" "0@eth0"
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
@ -44,6 +44,9 @@ case "$FIRMWARE" in
|
||||
caldata_extract "ART" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1)
|
||||
;;
|
||||
xiaomi,r3d)
|
||||
caldata_extract "ART" 0x1000 0x2f20
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
caldata_extract "0:ART" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
|
||||
@ -84,6 +87,9 @@ case "$FIRMWARE" in
|
||||
caldata_extract "ART" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x0)
|
||||
;;
|
||||
xiaomi,r3d)
|
||||
caldata_extract "ART" 0x5000 0x2f20
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
caldata_extract "0:ART" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
|
||||
|
@ -16,5 +16,13 @@ boot() {
|
||||
linksys,ea8500)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
xiaomi,r3d)
|
||||
local boot_wait=$( fw_printenv boot_wait | cut -d = -f 2 )
|
||||
[ "$boot_wait" != "on" ] && fw_setenv boot_wait on
|
||||
local bootdelay=$( fw_printenv bootdelay | cut -d = -f 2 )
|
||||
[ "$bootdelay" != "3" ] && fw_setenv bootdelay 3
|
||||
local uart_en=$( fw_printenv uart_en | cut -d = -f 2 )
|
||||
[ "$uart_en" != "1" ] && fw_setenv uart_en 1
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
@ -54,6 +54,9 @@ platform_do_upgrade() {
|
||||
MTD_CONFIG_ARGS="-s 0x200000"
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
xiaomi,r3d)
|
||||
platform_do_upgrade_xiaomi "$1" 0x2800000
|
||||
;;
|
||||
zyxel,nbg6817)
|
||||
zyxel_do_upgrade "$1"
|
||||
;;
|
||||
|
441
target/linux/ipq806x/base-files/lib/upgrade/xiaomi.sh
Normal file
441
target/linux/ipq806x/base-files/lib/upgrade/xiaomi.sh
Normal file
@ -0,0 +1,441 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
. /lib/functions.sh
|
||||
|
||||
MAGIC_XIAOMI_HDR1="48445231" # "HDR1" - xiaomi image header
|
||||
MAGIC_XIAOMI_BLK="beba0000"
|
||||
MAGIC_UIMAGE="27051956" # uImage header
|
||||
MAGIC_UBI="55424923" # "UBI#"
|
||||
MAGIC_UBIFS="31181006"
|
||||
MAGIC_HSQS="68737173" # "hsqs"
|
||||
MAGIC_SYSUPG="7379737570677261" # TAR "sysupgrade"
|
||||
|
||||
XIAOMI_PAGESIZE=2048
|
||||
|
||||
XIAOMI_FW_FILE=""
|
||||
XIAOMI_FW_SIZE=0
|
||||
XIAOMI_KERNEL_PART=$CI_KERNPART
|
||||
XIAOMI_KERNEL2_PART=""
|
||||
XIAOMI_KERNEL2_NAMES="kernel_stock|kernel_dup"
|
||||
XIAOMI_ROOTFS_PART=$CI_UBIPART
|
||||
XIAOMI_ROOTFS_PARTSIZE=
|
||||
|
||||
XIAOMI_RESTORE_ROOTFS2=
|
||||
|
||||
log_msg() {
|
||||
echo "$@"
|
||||
}
|
||||
|
||||
log_err() {
|
||||
echo "ERROR: $@" >&2
|
||||
}
|
||||
|
||||
die() {
|
||||
log_err "$@"
|
||||
exit 1
|
||||
}
|
||||
|
||||
get_uint32_at() {
|
||||
local offset=$1
|
||||
local endianness=$2
|
||||
local hex
|
||||
if [ $(( $offset + 4 )) -gt $XIAOMI_FW_SIZE ]; then
|
||||
echo ""
|
||||
return
|
||||
fi
|
||||
local dd_args="if=$XIAOMI_FW_FILE skip=$offset bs=1 count=4"
|
||||
if [ "$endianness" = "be" ]; then
|
||||
hex=$( dd $dd_args 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' )
|
||||
else
|
||||
hex=$( dd $dd_args 2>/dev/null | hexdump -v -e '1/4 "%02x"' )
|
||||
fi
|
||||
echo $( printf "%d" 0x$hex )
|
||||
}
|
||||
|
||||
get_hexdump_at() {
|
||||
local offset=$1
|
||||
local size=$2
|
||||
if [ $(( $offset + $size )) -gt $XIAOMI_FW_SIZE ]; then
|
||||
echo ""
|
||||
return
|
||||
fi
|
||||
local dd_args="if=$XIAOMI_FW_FILE skip=$offset bs=1 count=$size"
|
||||
echo $( dd $dd_args 2>/dev/null | hexdump -v -n $size -e '1/1 "%02x"' )
|
||||
}
|
||||
|
||||
get_round_up() {
|
||||
local value=$1
|
||||
local base=$2
|
||||
local pad=0
|
||||
if [ -z "$base" ]; then
|
||||
base=$XIAOMI_PAGESIZE
|
||||
else
|
||||
base=$( printf "%d" $base )
|
||||
fi
|
||||
if [ $(( $value % $base )) != 0 ]; then
|
||||
pad=$(( $base - $value % $base ))
|
||||
fi
|
||||
echo $(( $value + $pad ))
|
||||
}
|
||||
|
||||
get_part_size() {
|
||||
local part_name=$1
|
||||
local part=$( cat /proc/mtd | grep \"$part_name\" )
|
||||
if [ -z "$part" ]; then
|
||||
echo 0
|
||||
else
|
||||
local mtd_size_hex=$( echo $part | awk '{print "0x"$2}' )
|
||||
echo $( printf "%d" $mtd_size_hex )
|
||||
fi
|
||||
}
|
||||
|
||||
xiaomi_check_sizes() {
|
||||
local part_name=$1
|
||||
local img_offset=$2
|
||||
local img_size=$3
|
||||
|
||||
local mtd_size=$( get_part_size $part_name )
|
||||
if [ "$mtd_size" = "0" ]; then
|
||||
echo "cannot find mtd partition with name '$part_name'"
|
||||
return 1
|
||||
fi
|
||||
local img_end=$(( $img_offset + $img_size ))
|
||||
if [ $img_end -gt $XIAOMI_FW_SIZE ]; then
|
||||
echo "incorrect image size (part: '$part_name')"
|
||||
return 1
|
||||
fi
|
||||
if [ $img_size -gt $mtd_size ]; then
|
||||
echo "image is greater than partition '$part_name'"
|
||||
return 1
|
||||
fi
|
||||
echo ""
|
||||
return 0
|
||||
}
|
||||
|
||||
xiaomi_mtd_write() {
|
||||
local part_name=$1
|
||||
local img_offset=$2
|
||||
local img_size=$3
|
||||
local part_skip=$4
|
||||
|
||||
img_size=$( get_round_up $img_size )
|
||||
local err=$( xiaomi_check_sizes $part_name $img_offset $img_size )
|
||||
if [ -n "$err" ]; then
|
||||
log_err $err
|
||||
return 1
|
||||
fi
|
||||
if [ -n "$part_skip" ]; then
|
||||
part_skip="-p $part_skip"
|
||||
fi
|
||||
local count=$(( $img_size / $XIAOMI_PAGESIZE ))
|
||||
local dd_args="if=$XIAOMI_FW_FILE iflag=skip_bytes skip=$img_offset bs=$XIAOMI_PAGESIZE count=$count"
|
||||
dd $dd_args | mtd -f $part_skip write - "$part_name" || {
|
||||
log_err "Failed to flash '$part_name'"
|
||||
return 1
|
||||
}
|
||||
return 0
|
||||
}
|
||||
|
||||
xiaomi_flash_images() {
|
||||
local kernel_offset=$1
|
||||
local kernel_size=$2
|
||||
local rootfs_offset=$3
|
||||
local rootfs_size=$4
|
||||
local err
|
||||
local part_skip=0
|
||||
|
||||
kernel_size=$( get_round_up $kernel_size )
|
||||
rootfs_size=$( get_round_up $rootfs_size )
|
||||
|
||||
err=$( xiaomi_check_sizes $XIAOMI_KERNEL_PART $kernel_offset $kernel_size )
|
||||
[ -n "$err" ] && { log_err $err; return 1; }
|
||||
|
||||
if [ -n "$XIAOMI_KERNEL2_PART" ]; then
|
||||
err=$( xiaomi_check_sizes $XIAOMI_KERNEL2_PART $kernel_offset $kernel_size )
|
||||
[ -n "$err" ] && { log_err $err; return 1; }
|
||||
fi
|
||||
|
||||
err=$( xiaomi_check_sizes $XIAOMI_ROOTFS_PART $rootfs_offset $rootfs_size )
|
||||
[ -n "$err" ] && { log_err $err; return 1; }
|
||||
|
||||
if [ "$XIAOMI_RESTORE_ROOTFS2" = "true" -a -n "$XIAOMI_ROOTFS_PARTSIZE" ]; then
|
||||
part_skip=$( printf "%d" $XIAOMI_ROOTFS_PARTSIZE )
|
||||
if [ $part_skip -lt 1000000 ]; then
|
||||
part_skip=0
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ $part_skip -gt 0 ]; then
|
||||
local ksize=$(( $part_skip + $rootfs_size ))
|
||||
local mtd_size=$( get_part_size $XIAOMI_ROOTFS_PART )
|
||||
if [ $ksize -gt $mtd_size ]; then
|
||||
log_err "double rootfs is greater than partition '$XIAOMI_ROOTFS_PART'"
|
||||
return 1
|
||||
fi
|
||||
fi
|
||||
|
||||
mtd erase "$XIAOMI_ROOTFS_PART" || {
|
||||
log_err "Failed to erase partition '$part_name'"
|
||||
return 1
|
||||
}
|
||||
|
||||
xiaomi_mtd_write $XIAOMI_KERNEL_PART $kernel_offset $kernel_size || {
|
||||
log_err "Failed flash data to '$XIAOMI_KERNEL_PART' partition"
|
||||
return 1
|
||||
}
|
||||
log_msg "Kernel image flashed to '$XIAOMI_KERNEL_PART'"
|
||||
|
||||
if [ -n "$XIAOMI_KERNEL2_PART" ]; then
|
||||
xiaomi_mtd_write $XIAOMI_KERNEL2_PART $kernel_offset $kernel_size || {
|
||||
log_err "Failed flash data to '$XIAOMI_KERNEL2_PART' partition"
|
||||
return 1
|
||||
}
|
||||
log_msg "Kernel image flashed to '$XIAOMI_KERNEL2_PART'"
|
||||
fi
|
||||
|
||||
xiaomi_mtd_write $XIAOMI_ROOTFS_PART $rootfs_offset $rootfs_size || {
|
||||
log_err "Failed flash data to '$XIAOMI_ROOTFS_PART' partition"
|
||||
return 1
|
||||
}
|
||||
log_msg "Rootfs image flashed to '$XIAOMI_ROOTFS_PART'!"
|
||||
|
||||
if [ $part_skip -gt 0 ]; then
|
||||
xiaomi_mtd_write $XIAOMI_ROOTFS_PART $rootfs_offset $rootfs_size $part_skip || {
|
||||
log_err "Failed flash data to '$XIAOMI_ROOTFS_PART' partition (2)"
|
||||
return 1
|
||||
}
|
||||
log_msg "Rootfs image flashed to '$XIAOMI_ROOTFS_PART':$XIAOMI_ROOTFS_PARTSIZE"
|
||||
fi
|
||||
|
||||
log_msg "Firmware write successful! Reboot..."
|
||||
sync
|
||||
umount -a
|
||||
reboot -f
|
||||
exit 0
|
||||
}
|
||||
|
||||
check_ubi_header() {
|
||||
local offset=$1
|
||||
|
||||
local magic=$( get_hexdump_at $offset 4 )
|
||||
[ "$magic" != $MAGIC_UBI ] && { echo ""; return 1; }
|
||||
|
||||
local magic_ubi2="55424921" # "UBI!"
|
||||
offset=$(( $offset + $XIAOMI_PAGESIZE ))
|
||||
magic=$( get_hexdump_at $offset 4 )
|
||||
[ "$magic" != $magic_ubi2 ] && { echo ""; return 1; }
|
||||
|
||||
echo "true"
|
||||
return 0
|
||||
}
|
||||
|
||||
get_rootfs_offset() {
|
||||
local start=$1
|
||||
local pos offset align end
|
||||
|
||||
for offset in 0 1 2 3 4; do
|
||||
pos=$(( $start + $offset ))
|
||||
[ -n "$( check_ubi_header $pos )" ] && { echo $pos; return 0; }
|
||||
done
|
||||
|
||||
for align in 4 8 16 32 64 128 256 512 1024 2048 4096; do
|
||||
pos=$( get_round_up $start $align )
|
||||
[ -n "$( check_ubi_header $pos )" ] && { echo $pos; return 0; }
|
||||
done
|
||||
|
||||
align=65536
|
||||
pos=$( get_round_up $start $align )
|
||||
end=$(( $pos + 3000000 ))
|
||||
while true; do
|
||||
[ $(( $pos + 150000 )) -gt $XIAOMI_FW_SIZE ] && break
|
||||
[ -n "$( check_ubi_header $pos )" ] && { echo $pos; return 0; }
|
||||
pos=$(( $pos + $align ))
|
||||
[ $pos -ge $end ] && break
|
||||
done
|
||||
|
||||
echo ""
|
||||
return 1
|
||||
}
|
||||
|
||||
xiaomi_do_factory_upgrade() {
|
||||
local err
|
||||
local magic
|
||||
local kernel_offset kernel_size
|
||||
local rootfs_offset rootfs_size
|
||||
|
||||
local kernel_mtd="$( find_mtd_index $XIAOMI_KERNEL_PART )"
|
||||
if [ -z "$kernel_mtd" ]; then
|
||||
log_err "partition '$XIAOMI_KERNEL_PART' not found"
|
||||
return 1
|
||||
fi
|
||||
log_msg "Forced factory upgrade..."
|
||||
|
||||
kernel_offset=0
|
||||
kernel_size=$( get_uint32_at 12 "be" )
|
||||
kernel_size=$(( $kernel_size + 64 ))
|
||||
|
||||
rootfs_offset=$( get_rootfs_offset $kernel_size )
|
||||
if [ -z "$rootfs_offset" ]; then
|
||||
log_err "can't find ubinized rootfs in the firmware image"
|
||||
return 1
|
||||
fi
|
||||
rootfs_size=$(( $XIAOMI_FW_SIZE - $rootfs_offset ))
|
||||
local rootfs_end=$(( $rootfs_offset + $rootfs_size ))
|
||||
|
||||
XIAOMI_RESTORE_ROOTFS2=false
|
||||
xiaomi_flash_images $kernel_offset $kernel_size $rootfs_offset $rootfs_size || {
|
||||
log_err "can't flash factory image"
|
||||
return 1
|
||||
}
|
||||
exit 0
|
||||
}
|
||||
|
||||
xiaomi_do_revert_stock() {
|
||||
local err
|
||||
local magic
|
||||
local blk blkpos blk_magic offset file_size
|
||||
local kernel_offset
|
||||
local kernel_size=0
|
||||
local rootfs_offset
|
||||
local rootfs_size=0
|
||||
|
||||
local kernel_mtd=$( find_mtd_index $XIAOMI_KERNEL_PART )
|
||||
if [ -z "$kernel_mtd" ]; then
|
||||
log_err "partition '$XIAOMI_KERNEL_PART' not found"
|
||||
return 1
|
||||
fi
|
||||
log_msg "Forced revert to stock firmware..."
|
||||
|
||||
for blk in 16 20 24 28 32 36; do
|
||||
blkpos=$( get_uint32_at $blk )
|
||||
[ -z "$blkpos" ] && continue
|
||||
[ $blkpos -lt 48 ] && continue
|
||||
blk_magic=$( get_hexdump_at $blkpos 4 )
|
||||
[ "$blk_magic" != $MAGIC_XIAOMI_BLK ] && continue
|
||||
offset=$(( $blkpos + 8 ))
|
||||
file_size=$( get_uint32_at $offset 4 )
|
||||
[ -z "$file_size" ] && continue
|
||||
[ $file_size -lt 1000000 ] && continue
|
||||
offset=$(( $blkpos + 48 ))
|
||||
magic=$( get_hexdump_at $offset 4 )
|
||||
if [ "$magic" = $MAGIC_UIMAGE ]; then
|
||||
kernel_size=$file_size
|
||||
kernel_offset=$offset
|
||||
fi
|
||||
if [ "$magic" = $MAGIC_UBI -o "$magic" = $MAGIC_HSQS ]; then
|
||||
rootfs_size=$file_size
|
||||
rootfs_offset=$offset
|
||||
fi
|
||||
done
|
||||
if [ $kernel_size -eq 0 ]; then
|
||||
log_err "incorrect stock firmware image (kernel not found)"
|
||||
return 1
|
||||
fi
|
||||
if [ $rootfs_size -eq 0 ]; then
|
||||
log_err "incorrect stock firmware image (rootfs not found)"
|
||||
return 1
|
||||
fi
|
||||
|
||||
XIAOMI_RESTORE_ROOTFS2=true
|
||||
xiaomi_flash_images $kernel_offset $kernel_size $rootfs_offset $rootfs_size || {
|
||||
log_err "ERROR: can't revert to stock firmware"
|
||||
return 1
|
||||
}
|
||||
exit 0
|
||||
}
|
||||
|
||||
platform_do_upgrade_xiaomi() {
|
||||
XIAOMI_FW_FILE=$1
|
||||
local stock_rootfs_size=$2
|
||||
local magic
|
||||
local kernel_mtd kernel2_mtd rootfs_mtd
|
||||
local kernel2_part_list part_name
|
||||
|
||||
XIAOMI_FW_SIZE=$( wc -c "$XIAOMI_FW_FILE" 2> /dev/null | awk '{print $1}' )
|
||||
if [ -z "$XIAOMI_FW_SIZE" ]; then
|
||||
log_err "File '$XIAOMI_FW_FILE' not found!"
|
||||
exit 1
|
||||
fi
|
||||
if [ $XIAOMI_FW_SIZE -lt 1000000 ]; then
|
||||
log_err "file '$XIAOMI_FW_FILE' is incorrect"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
kernel_mtd=$( find_mtd_index $XIAOMI_KERNEL_PART )
|
||||
if [ -z "$kernel_mtd" ]; then
|
||||
log_err "cannot find mtd partition for '$XIAOMI_KERNEL_PART'"
|
||||
exit 1
|
||||
fi
|
||||
kernel2_part_list=$( echo "$XIAOMI_KERNEL2_NAMES" | sed 's/|/\n/g' )
|
||||
for part_name in $kernel2_part_list; do
|
||||
kernel2_mtd=$( find_mtd_index $part_name )
|
||||
if [ -n "$kernel2_mtd" ]; then
|
||||
XIAOMI_KERNEL2_PART="$part_name"
|
||||
log_msg "Found alt kernel partition '$XIAOMI_KERNEL2_PART'"
|
||||
break
|
||||
fi
|
||||
done
|
||||
rootfs_mtd=$( find_mtd_index $XIAOMI_ROOTFS_PART )
|
||||
if [ -z "$rootfs_mtd" ]; then
|
||||
log_err "cannot find mtd partition for '$XIAOMI_ROOTFS_PART'"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
magic=$( get_hexdump_at 0 4 )
|
||||
|
||||
# Flash factory image (uImage header)
|
||||
if [ "$magic" = $MAGIC_UIMAGE ]; then
|
||||
xiaomi_do_factory_upgrade
|
||||
exit $?
|
||||
fi
|
||||
|
||||
# Revert to stock firmware ("HDR1" header)
|
||||
if [ "$magic" = $MAGIC_XIAOMI_HDR1 ]; then
|
||||
if [ -n "$stock_rootfs_size" ]; then
|
||||
XIAOMI_ROOTFS_PARTSIZE=$stock_rootfs_size
|
||||
fi
|
||||
xiaomi_do_revert_stock
|
||||
exit $?
|
||||
fi
|
||||
|
||||
magic=$( get_hexdump_at 0 8 )
|
||||
if [ "$magic" != $MAGIC_SYSUPG ]; then
|
||||
log_err "incorrect image for system upgrading!"
|
||||
exit 1
|
||||
fi
|
||||
log_msg "SysUpgrade start..."
|
||||
local tar_file=$XIAOMI_FW_FILE
|
||||
local board_dir=$( tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$' )
|
||||
[ -z "$board_dir" ] && {
|
||||
log_err "board dir not found"
|
||||
exit 1
|
||||
}
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
local control_len=$( (tar xf $tar_file $board_dir/CONTROL -O | wc -c) 2> /dev/null)
|
||||
if [ $control_len -lt 3 ]; then
|
||||
log_err "incorrect stock firmware image (CONTROL not found)"
|
||||
exit 1
|
||||
fi
|
||||
local kernel_len=$( (tar xf $tar_file $board_dir/kernel -O | wc -c) 2> /dev/null)
|
||||
if [ $kernel_len -lt 1000000 ]; then
|
||||
log_err "incorrect stock firmware image (kernel not found)"
|
||||
exit 1
|
||||
fi
|
||||
local rootfs_len=$( (tar xf $tar_file $board_dir/root -O | wc -c) 2> /dev/null)
|
||||
if [ $rootfs_len -lt 1000000 ]; then
|
||||
log_err "incorrect stock firmware image (rootfs not found)"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -n "$XIAOMI_KERNEL2_PART" ]; then
|
||||
tar Oxf $tar_file $board_dir/kernel | mtd -f write - $XIAOMI_KERNEL2_PART && {
|
||||
log_msg "Kernel image flashed to '$XIAOMI_KERNEL2_PART'"
|
||||
} || {
|
||||
log_err "cannot flash partition '$XIAOMI_KERNEL2_PART'"
|
||||
exit 1
|
||||
}
|
||||
fi
|
||||
|
||||
nand_do_upgrade "$XIAOMI_FW_FILE"
|
||||
}
|
@ -0,0 +1,436 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Xiaomi Mi Router HD (R3D)";
|
||||
compatible = "xiaomi,r3d", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rsvd@44600000 {
|
||||
reg = <0x44600000 0x200000>; /* IPQ_TZ_APPS_ADDR */
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac1;
|
||||
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &led_status_yellow;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_yellow;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "power"; /* Labeled POWER on the device, but using for sleep mode */
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_status_red: led_status_red {
|
||||
label = "red:status";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
led_status_blue: led_status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
led_status_yellow: led_status_yellow {
|
||||
label = "yellow:status";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
i2c_gpio_0 { // GSBI1
|
||||
compatible = "i2c-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
sda-gpios = <&qcom_pinmux 53 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&qcom_pinmux 54 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
|
||||
emc2301@2f {
|
||||
compatible = "smsc,emc2301";
|
||||
reg = <0x2f>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
fan@0 {
|
||||
reg = <0>;
|
||||
pwm-output-mode = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c_gpio_1 { // GSBI2
|
||||
compatible = "i2c-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "default";
|
||||
sda-gpios = <&qcom_pinmux 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&qcom_pinmux 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
|
||||
tmp75@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// https://github.com/openwrt/openwrt/commit/622ce713ca246aa465bf28d2a743f96999085ea2
|
||||
// https://github.com/openwrt/openwrt/commit/2336c2dbb1929837f7e42d4315c8073342a5b46b
|
||||
// https://forum.openwrt.org/t/failed-to-startup-an-ipq806x-router-on-kernel-5-4/60775/41
|
||||
&CPU_SPC {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
i2c1_pins: i2c1_pins { // GSBI1 - EMC2301
|
||||
mux {
|
||||
pins = "gpio53", "gpio54";
|
||||
function = "gsbi1";
|
||||
drive-strength = <12>;
|
||||
bias-none;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2_pins { // GSBI2 - TMP75
|
||||
mux {
|
||||
pins = "gpio24", "gpio25";
|
||||
function = "gsbi2";
|
||||
drive-strength = <12>;
|
||||
bias-none;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb_pwr_en_pins: usb_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio56";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
mtd-mac-address = <&art 0x1006>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0040";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
mtd-mac-address = <&art 0x5006>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0xf0000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x40000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "SBL2";
|
||||
reg = <0xc0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "SBL3";
|
||||
reg = <0x140000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1c0000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x1c0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@240000 {
|
||||
label = "SSD";
|
||||
reg = <0x240000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2c0000 {
|
||||
label = "TZ";
|
||||
reg = <0x2c0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@340000 {
|
||||
label = "RPM";
|
||||
reg = <0x340000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3c0000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x3c0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4c0000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x4c0000 0x80000>;
|
||||
};
|
||||
|
||||
art: partition@540000 {
|
||||
label = "ART";
|
||||
reg = <0x540000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5c0000 {
|
||||
label = "BOOTCONFIG";
|
||||
reg = <0x5c0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "bdata";
|
||||
reg = <0x600000 0x80000>;
|
||||
};
|
||||
|
||||
partition@680000 {
|
||||
label = "crash";
|
||||
reg = <0x680000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@700000 {
|
||||
label = "crash_syslog";
|
||||
reg = <0x700000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@780000 {
|
||||
label = "rsvd";
|
||||
reg = <0x780000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* Stock U-Boot support Dual Boot */
|
||||
partition@800000 {
|
||||
label = "kernel_dup";
|
||||
reg = <0x800000 0x400000>;
|
||||
};
|
||||
|
||||
partition@c00000 {
|
||||
label = "kernel";
|
||||
reg = <0xc00000 0x400000>;
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "ubi";
|
||||
reg = <0x1000000 0xf000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x07600000 /* PAD0_MODE */
|
||||
0x08 0x01000000 /* PAD5_MODE */
|
||||
0x0c 0x00000080 /* PAD6_MODE */
|
||||
0x7c 0x0000004e /* PORT0_STATUS */
|
||||
0x94 0x0000004e /* PORT6_STATUS */
|
||||
0xe0 0xc74164de /* SGMII_CTRL */
|
||||
0xe4 0x0006a545 /* MAC_POWER_SEL */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&art 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&art 6>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
@ -393,6 +393,23 @@ define Device/ubnt_unifi-ac-hd
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_unifi-ac-hd
|
||||
|
||||
define Device/xiaomi_r3d
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := Xiaomi
|
||||
DEVICE_MODEL := R3D
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 86016k
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := factory.bin sysupgrade.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(BLOCKSIZE) | check-size
|
||||
DEVICE_PACKAGES := kmod-i2c-gpio kmod-hwmon-lm75 kmod-hwmon-emc2305 hwmon-drivetemp \
|
||||
kmod-usb-storage-uas ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct
|
||||
endef
|
||||
TARGET_DEVICES += xiaomi_r3d
|
||||
|
||||
define Device/zyxel_nbg6817
|
||||
DEVICE_VENDOR := ZyXEL
|
||||
DEVICE_MODEL := NBG6817
|
||||
|
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -842,7 +842,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -842,7 +842,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-ipq4019-ap.dk04.1-c3.dtb \
|
||||
qcom-ipq4019-ap.dk07.1-c1.dtb \
|
||||
qcom-ipq4019-ap.dk07.1-c2.dtb \
|
||||
@ -23,6 +23,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||
+ qcom-ipq8064-ea7500-v1.dtb \
|
||||
+ qcom-ipq8064-ea8500.dtb \
|
||||
+ qcom-ipq8064-g10.dtb \
|
||||
+ qcom-ipq8064-r3d.dtb \
|
||||
+ qcom-ipq8064-r7500.dtb \
|
||||
+ qcom-ipq8064-r7500v2.dtb \
|
||||
+ qcom-ipq8064-unifi-ac-hd.dtb \
|
||||
|
Loading…
Reference in New Issue
Block a user