rockchip: motorcomm: move new files to dir

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 3ca7a5f921)

target/linux/rockchip/files/drivers/net/phy/motorcomm.c

@@ -0,0 +1,345 @@
+/*
+ * drivers/net/phy/motorcomm.c
+ *
+ * Driver for Motorcomm PHYs
+ *
+ * Author: Leilei Zhao <leilei.zhao@motorcomm.com>
+ *
+ * Copyright (c) 2019 Motorcomm, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : Motorcomm Phys:
+ *		Giga phys: yt8511, yt8521
+ *		100/10 Phys : yt8512, yt8512b, yt8510
+ *		Automotive 100Mb Phys : yt8010
+ *		Automotive 100/10 hyper range Phys: yt8510
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/motorcomm_phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+
+static int ytphy_read_ext(struct phy_device *phydev, u32 regnum)
+{
+	int ret;
+	int val;
+
+	ret = phy_write(phydev, REG_DEBUG_ADDR_OFFSET, regnum);
+	if (ret < 0)
+		return ret;
+
+	val = phy_read(phydev, REG_DEBUG_DATA);
+
+	return val;
+}
+
+static int ytphy_write_ext(struct phy_device *phydev, u32 regnum, u16 val)
+{
+	int ret;
+
+	ret = phy_write(phydev, REG_DEBUG_ADDR_OFFSET, regnum);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write(phydev, REG_DEBUG_DATA, val);
+
+	return ret;
+}
+
+static int yt8010_config_aneg(struct phy_device *phydev)
+{
+	phydev->speed = SPEED_100;
+	return 0;
+}
+
+static int yt8512_clk_init(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+
+	val = ytphy_read_ext(phydev, YT8512_EXTREG_AFE_PLL);
+	if (val < 0)
+		return val;
+
+	val |= YT8512_CONFIG_PLL_REFCLK_SEL_EN;
+
+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_AFE_PLL, val);
+	if (ret < 0)
+		return ret;
+
+	val = ytphy_read_ext(phydev, YT8512_EXTREG_EXTEND_COMBO);
+	if (val < 0)
+		return val;
+
+	val |= YT8512_CONTROL1_RMII_EN;
+
+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_EXTEND_COMBO, val);
+	if (ret < 0)
+		return ret;
+
+	val = phy_read(phydev, MII_BMCR);
+	if (val < 0)
+		return val;
+
+	val |= YT_SOFTWARE_RESET;
+	ret = phy_write(phydev, MII_BMCR, val);
+
+	return ret;
+}
+
+static int yt8512_led_init(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+	int mask;
+
+	val = ytphy_read_ext(phydev, YT8512_EXTREG_LED0);
+	if (val < 0)
+		return val;
+
+	val |= YT8512_LED0_ACT_BLK_IND;
+
+	mask = YT8512_LED0_DIS_LED_AN_TRY | YT8512_LED0_BT_BLK_EN |
+		YT8512_LED0_HT_BLK_EN | YT8512_LED0_COL_BLK_EN |
+		YT8512_LED0_BT_ON_EN;
+	val &= ~mask;
+
+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_LED0, val);
+	if (ret < 0)
+		return ret;
+
+	val = ytphy_read_ext(phydev, YT8512_EXTREG_LED1);
+	if (val < 0)
+		return val;
+
+	val |= YT8512_LED1_BT_ON_EN;
+
+	mask = YT8512_LED1_TXACT_BLK_EN | YT8512_LED1_RXACT_BLK_EN;
+	val &= ~mask;
+
+	ret = ytphy_write_ext(phydev, YT8512_LED1_BT_ON_EN, val);
+
+	return ret;
+}
+
+static int yt8512_config_init(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+
+	ret = yt8512_clk_init(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = yt8512_led_init(phydev);
+
+	/* disable auto sleep */
+	val = ytphy_read_ext(phydev, YT8512_EXTREG_SLEEP_CONTROL1);
+	if (val < 0)
+		return val;
+
+	val &= (~BIT(YT8512_EN_SLEEP_SW_BIT));
+
+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_SLEEP_CONTROL1, val);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int yt8512_read_status(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+	int speed, speed_mode, duplex;
+
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
+
+	val = phy_read(phydev, REG_PHY_SPEC_STATUS);
+	if (val < 0)
+		return val;
+
+	duplex = (val & YT8512_DUPLEX) >> YT8512_DUPLEX_BIT;
+	speed_mode = (val & YT8512_SPEED_MODE) >> YT8512_SPEED_MODE_BIT;
+	switch (speed_mode) {
+	case 0:
+		speed = SPEED_10;
+		break;
+	case 1:
+		speed = SPEED_100;
+		break;
+	case 2:
+	case 3:
+	default:
+		speed = SPEED_UNKNOWN;
+		break;
+	}
+
+	phydev->speed = speed;
+	phydev->duplex = duplex;
+
+	return 0;
+}
+
+static int yt8521_config_init(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+
+	/* disable auto sleep */
+	val = ytphy_read_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1);
+	if (val < 0)
+		return val;
+
+	val &= (~BIT(YT8521_EN_SLEEP_SW_BIT));
+	ret = ytphy_write_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1, val);
+	if (ret < 0)
+		return ret;
+
+	/* switch to access UTP */
+	ret = ytphy_write_ext(phydev, 0xa000, 0);
+	if (ret < 0)
+		return ret;
+
+	/* enable RXC clock when no wire plug */
+	val = ytphy_read_ext(phydev, 0xc);
+	if (val < 0)
+		return val;
+
+	val &= ~(1 << 12);
+	ret = ytphy_write_ext(phydev, 0xc, val);
+	if (ret < 0)
+		return ret;
+
+	/* output SyncE clock (125mhz) even link is down */
+	ret = ytphy_write_ext(phydev, 0xa012, 0x38);
+	if (ret < 0)
+		return ret;
+
+	/* disable rgmii clk 2ns delay */
+	val = ytphy_read_ext(phydev, 0xa001);
+	if (val < 0)
+		return val;
+
+	val &= ~(1 << 8);
+	ret = ytphy_write_ext(phydev, 0xa001, val);
+	if (ret < 0)
+		return ret;
+
+	/* setup delay */
+	val = (1 << 10) | (0xf << 4) | 5;
+	ret = ytphy_write_ext(phydev, 0xa003, val);
+	if (ret < 0)
+		return ret;
+
+	/* LED0: Unused/Off, LED1: Link, LED2: Activity, 8Hz */
+	ytphy_write_ext(phydev, 0xa00b, 0xe004);
+	ytphy_write_ext(phydev, 0xa00c, 0);
+	ytphy_write_ext(phydev, 0xa00d, 0x2600);
+	ytphy_write_ext(phydev, 0xa00e, 0x0070);
+	ytphy_write_ext(phydev, 0xa00f, 0x000a);
+
+	return 0;
+}
+
+static int yt8521_config_intr(struct phy_device *phydev)
+{
+	int val;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		val = BIT(14) | BIT(13) | BIT(11) | BIT(10);
+	else
+		val = 0;
+
+	return phy_write(phydev, REG_INT_MASK, val);
+}
+
+static int yt8521_ack_interrupt(struct phy_device *phydev)
+{
+	int val;
+
+	val = phy_read(phydev, REG_INT_STATUS);
+	phydev_dbg(phydev, "intr status 0x04%x\n", val);
+
+	return (val < 0) ? val : 0;
+}
+
+static struct phy_driver ytphy_drvs[] = {
+	{
+		.phy_id		= PHY_ID_YT8010,
+		.name		= "YT8010 Automotive Ethernet",
+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
+		.features	= PHY_BASIC_FEATURES,
+		.config_aneg	= yt8010_config_aneg,
+		.read_status	= genphy_read_status,
+	}, {
+		.phy_id		= PHY_ID_YT8510,
+		.name		= "YT8510 100/10Mb Ethernet",
+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
+		.features	= PHY_BASIC_FEATURES,
+		.read_status	= genphy_read_status,
+	}, {
+		.phy_id		= PHY_ID_YT8511,
+		.name		= "YT8511 Gigabit Ethernet",
+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
+		.features	= PHY_GBIT_FEATURES,
+		.read_status	= genphy_read_status,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_YT8512,
+		.name		= "YT8512 Ethernet",
+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
+		.features	= PHY_BASIC_FEATURES,
+		.config_init	= yt8512_config_init,
+		.read_status	= yt8512_read_status,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_YT8512B,
+		.name		= "YT8512B Ethernet",
+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
+		.features	= PHY_BASIC_FEATURES,
+		.config_init	= yt8512_config_init,
+		.read_status	= yt8512_read_status,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_YT8521,
+		.name		= "YT8521 Ethernet",
+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
+		/* PHY_GBIT_FEATURES */
+		.config_init	= yt8521_config_init,
+		.ack_interrupt	= yt8521_ack_interrupt,
+		.config_intr	= yt8521_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	},
+};
+
+module_phy_driver(ytphy_drvs);
+
+MODULE_DESCRIPTION("Motorcomm PHY driver");
+MODULE_AUTHOR("Leilei Zhao");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
+	{ PHY_ID_YT8010, MOTORCOMM_PHY_ID_MASK },
+	{ PHY_ID_YT8510, MOTORCOMM_PHY_ID_MASK },
+	{ PHY_ID_YT8511, MOTORCOMM_PHY_ID_MASK },
+	{ PHY_ID_YT8512, MOTORCOMM_PHY_ID_MASK },
+	{ PHY_ID_YT8512B, MOTORCOMM_PHY_ID_MASK },
+	{ PHY_ID_YT8521, MOTORCOMM_PHY_ID_MASK },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);

target/linux/rockchip/files/include/linux/motorcomm_phy.h

@@ -0,0 +1,67 @@
+/*
+ * include/linux/motorcomm_phy.h
+ *
+ * Motorcomm PHY IDs
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _MOTORCOMM_PHY_H
+#define _MOTORCOMM_PHY_H
+
+#define MOTORCOMM_PHY_ID_MASK	0x00000fff
+
+#define PHY_ID_YT8010		0x00000309
+#define PHY_ID_YT8510		0x00000109
+#define PHY_ID_YT8511		0x0000010a
+#define PHY_ID_YT8512		0x00000118
+#define PHY_ID_YT8512B		0x00000128
+#define PHY_ID_YT8521		0x0000011a
+
+#define REG_PHY_SPEC_STATUS		0x11
+#define REG_INT_MASK			0x12
+#define REG_INT_STATUS			0x13
+#define REG_DEBUG_ADDR_OFFSET		0x1e
+#define REG_DEBUG_DATA			0x1f
+
+#define YT8512_EXTREG_AFE_PLL		0x50
+#define YT8512_EXTREG_EXTEND_COMBO	0x4000
+#define YT8512_EXTREG_LED0		0x40c0
+#define YT8512_EXTREG_LED1		0x40c3
+
+#define YT8512_EXTREG_SLEEP_CONTROL1	0x2027
+
+#define YT_SOFTWARE_RESET		0x8000
+
+#define YT8512_CONFIG_PLL_REFCLK_SEL_EN	0x0040
+#define YT8512_CONTROL1_RMII_EN		0x0001
+#define YT8512_LED0_ACT_BLK_IND		0x1000
+#define YT8512_LED0_DIS_LED_AN_TRY	0x0001
+#define YT8512_LED0_BT_BLK_EN		0x0002
+#define YT8512_LED0_HT_BLK_EN		0x0004
+#define YT8512_LED0_COL_BLK_EN		0x0008
+#define YT8512_LED0_BT_ON_EN		0x0010
+#define YT8512_LED1_BT_ON_EN		0x0010
+#define YT8512_LED1_TXACT_BLK_EN	0x0100
+#define YT8512_LED1_RXACT_BLK_EN	0x0200
+#define YT8512_SPEED_MODE		0xc000
+#define YT8512_DUPLEX			0x2000
+
+#define YT8512_SPEED_MODE_BIT		14
+#define YT8512_DUPLEX_BIT		13
+#define YT8512_EN_SLEEP_SW_BIT		15
+
+#define YT8521_EXTREG_SLEEP_CONTROL1	0x27
+#define YT8521_EN_SLEEP_SW_BIT		15
+
+#define YT8521_SPEED_MODE		0xc000
+#define YT8521_DUPLEX			0x2000
+#define YT8521_SPEED_MODE_BIT		14
+#define YT8521_DUPLEX_BIT		13
+#define YT8521_LINK_STATUS_BIT		10
+
+#endif /* _MOTORCOMM_PHY_H */

target/linux/rockchip/patches-5.4/600-net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch

@@ -37,421 +37,3 @@ Signed-off-by: hmz007 <hmz007@gmail.com>
  obj-$(CONFIG_NATIONAL_PHY)	+= national.o
  obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
  obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
---- /dev/null
-+++ b/drivers/net/phy/motorcomm.c
-@@ -0,0 +1,345 @@
-+/*
-+ * drivers/net/phy/motorcomm.c
-+ *
-+ * Driver for Motorcomm PHYs
-+ *
-+ * Author: Leilei Zhao <leilei.zhao@motorcomm.com>
-+ *
-+ * Copyright (c) 2019 Motorcomm, Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ * Support : Motorcomm Phys:
-+ *		Giga phys: yt8511, yt8521
-+ *		100/10 Phys : yt8512, yt8512b, yt8510
-+ *		Automotive 100Mb Phys : yt8010
-+ *		Automotive 100/10 hyper range Phys: yt8510
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+#include <linux/motorcomm_phy.h>
-+#include <linux/of.h>
-+#include <linux/clk.h>
-+
-+static int ytphy_read_ext(struct phy_device *phydev, u32 regnum)
-+{
-+	int ret;
-+	int val;
-+
-+	ret = phy_write(phydev, REG_DEBUG_ADDR_OFFSET, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	val = phy_read(phydev, REG_DEBUG_DATA);
-+
-+	return val;
-+}
-+
-+static int ytphy_write_ext(struct phy_device *phydev, u32 regnum, u16 val)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, REG_DEBUG_ADDR_OFFSET, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phy_write(phydev, REG_DEBUG_DATA, val);
-+
-+	return ret;
-+}
-+
-+static int yt8010_config_aneg(struct phy_device *phydev)
-+{
-+	phydev->speed = SPEED_100;
-+	return 0;
-+}
-+
-+static int yt8512_clk_init(struct phy_device *phydev)
-+{
-+	int ret;
-+	int val;
-+
-+	val = ytphy_read_ext(phydev, YT8512_EXTREG_AFE_PLL);
-+	if (val < 0)
-+		return val;
-+
-+	val |= YT8512_CONFIG_PLL_REFCLK_SEL_EN;
-+
-+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_AFE_PLL, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	val = ytphy_read_ext(phydev, YT8512_EXTREG_EXTEND_COMBO);
-+	if (val < 0)
-+		return val;
-+
-+	val |= YT8512_CONTROL1_RMII_EN;
-+
-+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_EXTEND_COMBO, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	val = phy_read(phydev, MII_BMCR);
-+	if (val < 0)
-+		return val;
-+
-+	val |= YT_SOFTWARE_RESET;
-+	ret = phy_write(phydev, MII_BMCR, val);
-+
-+	return ret;
-+}
-+
-+static int yt8512_led_init(struct phy_device *phydev)
-+{
-+	int ret;
-+	int val;
-+	int mask;
-+
-+	val = ytphy_read_ext(phydev, YT8512_EXTREG_LED0);
-+	if (val < 0)
-+		return val;
-+
-+	val |= YT8512_LED0_ACT_BLK_IND;
-+
-+	mask = YT8512_LED0_DIS_LED_AN_TRY | YT8512_LED0_BT_BLK_EN |
-+		YT8512_LED0_HT_BLK_EN | YT8512_LED0_COL_BLK_EN |
-+		YT8512_LED0_BT_ON_EN;
-+	val &= ~mask;
-+
-+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_LED0, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	val = ytphy_read_ext(phydev, YT8512_EXTREG_LED1);
-+	if (val < 0)
-+		return val;
-+
-+	val |= YT8512_LED1_BT_ON_EN;
-+
-+	mask = YT8512_LED1_TXACT_BLK_EN | YT8512_LED1_RXACT_BLK_EN;
-+	val &= ~mask;
-+
-+	ret = ytphy_write_ext(phydev, YT8512_LED1_BT_ON_EN, val);
-+
-+	return ret;
-+}
-+
-+static int yt8512_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+	int val;
-+
-+	ret = yt8512_clk_init(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = yt8512_led_init(phydev);
-+
-+	/* disable auto sleep */
-+	val = ytphy_read_ext(phydev, YT8512_EXTREG_SLEEP_CONTROL1);
-+	if (val < 0)
-+		return val;
-+
-+	val &= (~BIT(YT8512_EN_SLEEP_SW_BIT));
-+
-+	ret = ytphy_write_ext(phydev, YT8512_EXTREG_SLEEP_CONTROL1, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	return ret;
-+}
-+
-+static int yt8512_read_status(struct phy_device *phydev)
-+{
-+	int ret;
-+	int val;
-+	int speed, speed_mode, duplex;
-+
-+	ret = genphy_update_link(phydev);
-+	if (ret)
-+		return ret;
-+
-+	val = phy_read(phydev, REG_PHY_SPEC_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	duplex = (val & YT8512_DUPLEX) >> YT8512_DUPLEX_BIT;
-+	speed_mode = (val & YT8512_SPEED_MODE) >> YT8512_SPEED_MODE_BIT;
-+	switch (speed_mode) {
-+	case 0:
-+		speed = SPEED_10;
-+		break;
-+	case 1:
-+		speed = SPEED_100;
-+		break;
-+	case 2:
-+	case 3:
-+	default:
-+		speed = SPEED_UNKNOWN;
-+		break;
-+	}
-+
-+	phydev->speed = speed;
-+	phydev->duplex = duplex;
-+
-+	return 0;
-+}
-+
-+static int yt8521_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+	int val;
-+
-+	/* disable auto sleep */
-+	val = ytphy_read_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1);
-+	if (val < 0)
-+		return val;
-+
-+	val &= (~BIT(YT8521_EN_SLEEP_SW_BIT));
-+	ret = ytphy_write_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* switch to access UTP */
-+	ret = ytphy_write_ext(phydev, 0xa000, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* enable RXC clock when no wire plug */
-+	val = ytphy_read_ext(phydev, 0xc);
-+	if (val < 0)
-+		return val;
-+
-+	val &= ~(1 << 12);
-+	ret = ytphy_write_ext(phydev, 0xc, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* output SyncE clock (125mhz) even link is down */
-+	ret = ytphy_write_ext(phydev, 0xa012, 0x38);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* disable rgmii clk 2ns delay */
-+	val = ytphy_read_ext(phydev, 0xa001);
-+	if (val < 0)
-+		return val;
-+
-+	val &= ~(1 << 8);
-+	ret = ytphy_write_ext(phydev, 0xa001, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* setup delay */
-+	val = (1 << 10) | (0xf << 4) | 5;
-+	ret = ytphy_write_ext(phydev, 0xa003, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* LED0: Unused/Off, LED1: Link, LED2: Activity, 8Hz */
-+	ytphy_write_ext(phydev, 0xa00b, 0xe004);
-+	ytphy_write_ext(phydev, 0xa00c, 0);
-+	ytphy_write_ext(phydev, 0xa00d, 0x2600);
-+	ytphy_write_ext(phydev, 0xa00e, 0x0070);
-+	ytphy_write_ext(phydev, 0xa00f, 0x000a);
-+
-+	return 0;
-+}
-+
-+static int yt8521_config_intr(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-+		val = BIT(14) | BIT(13) | BIT(11) | BIT(10);
-+	else
-+		val = 0;
-+
-+	return phy_write(phydev, REG_INT_MASK, val);
-+}
-+
-+static int yt8521_ack_interrupt(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	val = phy_read(phydev, REG_INT_STATUS);
-+	phydev_dbg(phydev, "intr status 0x04%x\n", val);
-+
-+	return (val < 0) ? val : 0;
-+}
-+
-+static struct phy_driver ytphy_drvs[] = {
-+	{
-+		.phy_id		= PHY_ID_YT8010,
-+		.name		= "YT8010 Automotive Ethernet",
-+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
-+		.features	= PHY_BASIC_FEATURES,
-+		.config_aneg	= yt8010_config_aneg,
-+		.read_status	= genphy_read_status,
-+	}, {
-+		.phy_id		= PHY_ID_YT8510,
-+		.name		= "YT8510 100/10Mb Ethernet",
-+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
-+		.features	= PHY_BASIC_FEATURES,
-+		.read_status	= genphy_read_status,
-+	}, {
-+		.phy_id		= PHY_ID_YT8511,
-+		.name		= "YT8511 Gigabit Ethernet",
-+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
-+		.features	= PHY_GBIT_FEATURES,
-+		.read_status	= genphy_read_status,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+	}, {
-+		.phy_id		= PHY_ID_YT8512,
-+		.name		= "YT8512 Ethernet",
-+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
-+		.features	= PHY_BASIC_FEATURES,
-+		.config_init	= yt8512_config_init,
-+		.read_status	= yt8512_read_status,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+	}, {
-+		.phy_id		= PHY_ID_YT8512B,
-+		.name		= "YT8512B Ethernet",
-+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
-+		.features	= PHY_BASIC_FEATURES,
-+		.config_init	= yt8512_config_init,
-+		.read_status	= yt8512_read_status,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+	}, {
-+		.phy_id		= PHY_ID_YT8521,
-+		.name		= "YT8521 Ethernet",
-+		.phy_id_mask	= MOTORCOMM_PHY_ID_MASK,
-+		/* PHY_GBIT_FEATURES */
-+		.config_init	= yt8521_config_init,
-+		.ack_interrupt	= yt8521_ack_interrupt,
-+		.config_intr	= yt8521_config_intr,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+	},
-+};
-+
-+module_phy_driver(ytphy_drvs);
-+
-+MODULE_DESCRIPTION("Motorcomm PHY driver");
-+MODULE_AUTHOR("Leilei Zhao");
-+MODULE_LICENSE("GPL");
-+
-+static struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
-+	{ PHY_ID_YT8010, MOTORCOMM_PHY_ID_MASK },
-+	{ PHY_ID_YT8510, MOTORCOMM_PHY_ID_MASK },
-+	{ PHY_ID_YT8511, MOTORCOMM_PHY_ID_MASK },
-+	{ PHY_ID_YT8512, MOTORCOMM_PHY_ID_MASK },
-+	{ PHY_ID_YT8512B, MOTORCOMM_PHY_ID_MASK },
-+	{ PHY_ID_YT8521, MOTORCOMM_PHY_ID_MASK },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
---- /dev/null
-+++ b/include/linux/motorcomm_phy.h
-@@ -0,0 +1,67 @@
-+/*
-+ * include/linux/motorcomm_phy.h
-+ *
-+ * Motorcomm PHY IDs
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#ifndef _MOTORCOMM_PHY_H
-+#define _MOTORCOMM_PHY_H
-+
-+#define MOTORCOMM_PHY_ID_MASK	0x00000fff
-+
-+#define PHY_ID_YT8010		0x00000309
-+#define PHY_ID_YT8510		0x00000109
-+#define PHY_ID_YT8511		0x0000010a
-+#define PHY_ID_YT8512		0x00000118
-+#define PHY_ID_YT8512B		0x00000128
-+#define PHY_ID_YT8521		0x0000011a
-+
-+#define REG_PHY_SPEC_STATUS		0x11
-+#define REG_INT_MASK			0x12
-+#define REG_INT_STATUS			0x13
-+#define REG_DEBUG_ADDR_OFFSET		0x1e
-+#define REG_DEBUG_DATA			0x1f
-+
-+#define YT8512_EXTREG_AFE_PLL		0x50
-+#define YT8512_EXTREG_EXTEND_COMBO	0x4000
-+#define YT8512_EXTREG_LED0		0x40c0
-+#define YT8512_EXTREG_LED1		0x40c3
-+
-+#define YT8512_EXTREG_SLEEP_CONTROL1	0x2027
-+
-+#define YT_SOFTWARE_RESET		0x8000
-+
-+#define YT8512_CONFIG_PLL_REFCLK_SEL_EN	0x0040
-+#define YT8512_CONTROL1_RMII_EN		0x0001
-+#define YT8512_LED0_ACT_BLK_IND		0x1000
-+#define YT8512_LED0_DIS_LED_AN_TRY	0x0001
-+#define YT8512_LED0_BT_BLK_EN		0x0002
-+#define YT8512_LED0_HT_BLK_EN		0x0004
-+#define YT8512_LED0_COL_BLK_EN		0x0008
-+#define YT8512_LED0_BT_ON_EN		0x0010
-+#define YT8512_LED1_BT_ON_EN		0x0010
-+#define YT8512_LED1_TXACT_BLK_EN	0x0100
-+#define YT8512_LED1_RXACT_BLK_EN	0x0200
-+#define YT8512_SPEED_MODE		0xc000
-+#define YT8512_DUPLEX			0x2000
-+
-+#define YT8512_SPEED_MODE_BIT		14
-+#define YT8512_DUPLEX_BIT		13
-+#define YT8512_EN_SLEEP_SW_BIT		15
-+
-+#define YT8521_EXTREG_SLEEP_CONTROL1	0x27
-+#define YT8521_EN_SLEEP_SW_BIT		15
-+
-+#define YT8521_SPEED_MODE		0xc000
-+#define YT8521_DUPLEX			0x2000
-+#define YT8521_SPEED_MODE_BIT		14
-+#define YT8521_DUPLEX_BIT		13
-+#define YT8521_LINK_STATUS_BIT		10
-+
-+#endif /* _MOTORCOMM_PHY_H */