⛄ Sync 2024-08-31 16:27:27

2025-01-08 12:57:28 +08:00 · 2024-08-31 16:27:27 +08:00 · 2024-08-31 16:27:27 +08:00 · b90a70084c
commit b90a70084c
parent 1c64619a12
13 changed files with 164 additions and 102 deletions
--- a/luci-app-easytier/luasrc/model/cbi/easytier.lua
+++ b/luci-app-easytier/luasrc/model/cbi/easytier.lua
@ -49,10 +49,20 @@ peeradd = s:taboption("general",DynamicList, "peeradd", translate("对等节点"
 	translate("初始连接的对等节点 （-p 参数）"))
 peeradd.placeholder = "udp://22.1.1.1:11010"

-external_node = s:taboption("general", Value, "external_node", translate("共享节点地址"),
+external_node = s:taboption("general", DynamicList, "external_node", translate("共享节点地址"),
 	translate("使用公共共享节点来发现对等节点 （-e 参数）"))
 external_node.placeholder = "tcp://easytier.public.kkrainbow.top:11010"
-external_node.password = true
+external_node.default = ""
+external_node:value("tcp://easytier.public.kkrainbow.top:11010", translate("tcp://easytier.public.kkrainbow.top:11010"))
+external_node:value("tcp://s1.ct8.pl:11010", translate("tcp://s1.ct8.pl:11010"))
+external_node:value("tcp://c.oee.icu:60006", translate("tcp://c.oee.icu:60006"))
+external_node:value("udp://c.oee.icu:60006", translate("udp://c.oee.icu:60006"))
+external_node:value("wss://c.oee.icu:60007", translate("wss://c.oee.icu:60007"))
+external_node:value("tcp://etvm.oee.icu:31572", translate("tcp://etvm.oee.icu:31572"))
+external_node:value("wss://etvm.oee.icu:30845", translate("wss://etvm.oee.icu:30845"))
+external_node:value("tcp://et.323888.xyz:11010", translate("tcp://et.323888.xyz:11010"))
+external_node:value("udp://et.323888.xyz:11010", translate("udp://et.323888.xyz:11010"))
+external_node:value("wss://et.323888.xyz:11010", translate("wss://et.323888.xyz:11010"))

 proxy_network = s:taboption("general",DynamicList, "proxy_network", translate("代理网络"),
 	translate("将本地网络导出到 VPN 中的其他对等点 （-n 参数）"))
@ -64,8 +74,8 @@ rpc_portal.datatype = "range(1,65535)"

 listenermode = s:taboption("general",ListValue, "listenermode", translate("监听端口"),
 	translate("OFF:不监听任何端口，只连接到对等节点 （--no-listener 参数）"))
-listenermode:value("ON")
-listenermode:value("OFF")
+listenermode:value("ON",translate("监听"))
+listenermode:value("OFF",translate("不监听"))

 tcp_port = s:taboption("general",Value, "tcp_port", translate("tcp/udp端口"),
 	translate("tcp/udp协议，端口号：11010，表示 tcp/udp 将在 11010 上监听"))
@ -117,7 +127,7 @@ mtu.placeholder = "1300"

 default_protocol = s:taboption("general",ListValue, "default_protocol", translate("默认协议"),
 	translate("连接对等节点时使用的默认协议（--default-protocol 参数）"))
-default_protocol:value("-")
+default_protocol:value("-",translate("默认"))
 default_protocol:value("tcp")
 default_protocol:value("udp")
 default_protocol:value("ws")
@ -171,16 +181,25 @@ socks_port.datatype = "range(1,65535)"
 socks_port.placeholder = "1080"

 disable_p2p = s:taboption("general",Flag, "disable_p2p", translate("禁用P2P"),
-	translate("禁用P2P通信，只通过-p指定的节点转发数据包"))
+	translate("禁用P2P通信，只通过-p指定的节点转发数据包 （ --disable-p2p 参数）"))
 disable_p2p.rmempty = false

+disable_udp = s:taboption("general",Flag, "disable_udp", translate("禁用UDP"),
+	translate("禁用UDP打洞功能（ --disable-udp-hole-punching 参数）"))
+disable_udp.rmempty = false
+
 relay_all = s:taboption("general",Flag, "relay_all", translate("允许转发"),
 	translate("转发所有对等节点的RPC数据包，即使对等节点不在转发网络白名单中。<br>这可以帮助白名单外网络中的对等节点建立P2P连接。"))
 relay_all.rmempty = false

-log = s:taboption("general",Flag, "log", translate("启用日志"),
+log = s:taboption("general",ListValue, "log", translate("程序日志"),
 	translate("运行日志在/tmp/easytier.log,可在上方日志查看"))
-log.rmempty = false
+log.default = "info"
+log:value("off",translate("关闭"))
+log:value("info",translate("信息"))
+log:value("debug",translate("调试"))
+log:value("warn",translate("警告"))
+log:value("trace",translate("跟踪"))

 check = s:taboption("general",Flag, "check", translate("通断检测"),
        translate("开启通断检测后，可以指定对端的设备IP，当所有指定的IP都ping不通时将会重启easytier程序"))
@ -200,9 +219,28 @@ checktime:depends("check", "1")

 local process_status = luci.sys.exec("ps | grep easytier-core| grep -v grep")

+btn0 = s:taboption("infos", Button, "btn0")
+btn0.inputtitle = translate("node信息")
+btn0.description = translate("点击按钮刷新，查看本机信息")
+btn0.inputstyle = "apply"
+btn0.write = function()
+if process_status ~= "" then
+   luci.sys.call("$(dirname $(uci -q get easytier.@easytier[0].easytierbin))/easytier-cli node >/tmp/easytier-cli_node")
+else
+    luci.sys.call("echo '错误：程序未运行！请启动程序后重新点击刷新' >/tmp/easytier-cli_node")
+end
+end
+
+btn0info = s:taboption("infos", DummyValue, "btn0info")
+btn0info.rawhtml = true
+btn0info.cfgvalue = function(self, section)
+    local content = nixio.fs.readfile("/tmp/easytier-cli_node") or ""
+    return string.format("<pre>%s</pre>", luci.util.pcdata(content))
+end
+
 btn1 = s:taboption("infos", Button, "btn1")
 btn1.inputtitle = translate("peer信息")
-btn1.description = translate("点击按钮刷新，查看peer信息")
+btn1.description = translate("点击按钮刷新，查看对端信息")
 btn1.inputstyle = "apply"
 btn1.write = function()
 if process_status ~= "" then
--- a/luci-app-easytier/root/etc/init.d/easytier
+++ b/luci-app-easytier/root/etc/init.d/easytier
@ -4,6 +4,7 @@
 START=99
 USE_PROCD=1
 size="$(df -k | awk '/\/overlay$/ {sub(/K$/, "", $4); print $4}')"
+[ -z "$size" ] && size="$(df -k /usr/bin | awk 'NR==2 {print $(NF-2) }')"

 check () {
 if [ ! -z "$checkip" ] ; then
@ -62,14 +63,14 @@ start_et() {
                   upsize="$(du -k /tmp/easytier-core | cut -f1)"
                   result=$(expr $size - $upsize)
                   [ -z "$size"] && echo "$(date '+%Y-%m-%d %H:%M:%S') easytier : 获取可用空间失败，请使用ssh手动上传至 ${easytierbin} ${path}/easytier-cli" >>/tmp/easytier.log
-                   if [ $(($(/tmp/easytier-core -h | wc -l))) -gt 3 ] && [ "$result" -gt 4000 ] ; then
+                   if [ $(($(/tmp/easytier-core -h | wc -l))) -gt 3 ] && [ "$result" -gt 1000 ] ; then
                     mv -f /tmp/easytier-core "$easytierbin" 2>/dev/null
                     mv -f /tmp/easytier-cli "${path}/easytier-cli" 2>/dev/null
                     else
                     echo "$(date '+%Y-%m-%d %H:%M:%S') easytier : 无法替换，上传的程序不完整或自定义路径的可用空间不足，当前空间剩余${size}kb" >>/tmp/easytier.log
                   fi
                fi
-                if [ ! -f "$easytierbin" ] && [ "$size" -lt 4000 ] ; then
+                if [ ! -f "$easytierbin" ] && [ "$size" -lt 5000 ] ; then
                    echo "$(date '+%Y-%m-%d %H:%M:%S') easytier : 自定义程序路径的可用空间不足，当前可用空间剩余${size}kb,自动切换为内存/tmp/easytier-core" >>/tmp/easytier.log
                    sed -i "/easytierbin/c option easytierbin '/tmp/easytier-core' " /etc/config/easytier 
                    easytierbin=/tmp/easytier-core
@ -80,7 +81,7 @@ start_et() {
 		 [ -z "$newtag"] && newtag=v1.2.2
 		 echo "$(date '+%Y-%m-%d %H:%M:%S') easytier : 未找到程序 $easytierbin 开始在线下载${newtag}，下载较慢耐心等候" >>/tmp/easytier.log
                 mkdir -p "$path"
-	         curl -L -k -s -o /tmp/easytier.zip --connect-timeout 10 --retry 3 "http://gh.ddlc.top/https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip" || curl -L -k -s -o /tmp/easytier.zip --connect-timeout 10 --retry 3 "https://hub.gitmirror.com/https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip" || curl -L -k -s -o /tmp/easytier.zip --connect-timeout 10 --retry 3 "https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip"
+	         curl -L -k -s -o /tmp/easytier.zip --connect-timeout 10 --retry 3 "http://gh.ddlc.top/https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip" || curl -L -k -s -o /tmp/easytier.zip --connect-timeout 10 --retry 3 "https://hub.gitmirror.com/https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip" || wget --no-check-certificate --quiet --timeout=10 --tries=3 -O /tmp/easytier.zip "http://gh.ddlc.top/https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip" || curl -L -k -s -o /tmp/easytier.zip --connect-timeout 10 --retry 3 "https://github.com/EasyTier/EasyTier/releases/download/${newtag}/easytier-linux-${cpucore}-${newtag}.zip"
 	         unzip -q -o /tmp/easytier.zip -d /tmp
 	         chmod +x /tmp/easytier-linux-${cpucore}-${newtag}/*
 	         mv -f /tmp/easytier-linux-${cpucore}-${newtag}/* ${path}/*
@ -103,7 +104,7 @@ start_et() {
                ps | grep 'easytier-core' | grep -v grep | awk '{print $1}' | xargs kill >/dev/null 2>&1
                ps | grep 'easytier-core' | grep -v grep | awk '{print $1}' | xargs kill -9 >/dev/null 2>&1

-		local network_name network_secret ip_dhcp ipaddr peeradd external_node rpc_portal listenermode tunname relay_network disable_p2p
+		local network_name network_secret ip_dhcp ipaddr peeradd external_node rpc_portal listenermode tunname relay_network disable_p2p disable_udp
 		local tcp_port ws_port wss_port wg_port desvice_name instance_name vpn_portal mtu default_protocol disable_encryption whitelist socks_port
 		local multi_thread disable_ipv6 latency_first exit_node exit_nodes smoltcp no_tun manual_routes log check checkip proxy_network relay_all

@ -137,9 +138,10 @@ start_et() {
                config_get exit_nodes "$cfg" 'exit_nodes'
                config_get_bool no_tun "$cfg" 'no_tun' '0'
                config_get manual_routes "$cfg" 'manual_routes'
-                config_get_bool log "$cfg" 'log' '0'
+                config_get log "$cfg" 'log' 'off'
                config_get_bool check "$cfg" 'check' '0'
                config_get_bool disable_p2p "$cfg" 'disable_p2p' '0'
+                config_get_bool disable_udp "$cfg" 'disable_udp' '0'
                config_get_bool relay_all "$cfg" 'relay_all' '0'
                config_get checkip "$cfg" 'checkip'
                config_get socks_port "$cfg" 'socks_port'
@ -177,6 +179,15 @@ start_et() {
                   done
                   fi
                fi
+                if [ ! -z "$external_node" ] ; then
+                  if [[ "$(grep "list external_node" /etc/config/easytier | awk '{print $3}' | wc -l ) " -eq 1 ]]; then
+                    procd_append_param command -e "$external_node"
+                  else
+                    for external_nodes in $(cat /etc/config/easytier | grep 'list external_node'  | awk -F 'list external_node' '{print $2}' | sed "s/'/\n/g" | tr -d " ' "); do
+                    procd_append_param command -e "$external_nodes"
+                   done
+                   fi
+                fi
                if [ ! -z "$manual_routes" ] ; then
                  if [[ "$(grep "list manual_routes" /etc/config/easytier | awk '{print $3}' | wc -l ) " -eq 1 ]]; then
                    procd_append_param command --manual-routes "$manual_routes"
@ -195,7 +206,6 @@ start_et() {
                   done
                   fi
                fi
-		[ -z "$external_node" ] || procd_append_param command -e "$external_node"
 		[ -z "$rpc_portal" ] || procd_append_param command -r "$rpc_portal"
 		[ -z "$tcp_port" ] || procd_append_param command -l "tcp:$tcp_port"
 		[ -z "$tcp_port" ] || procd_append_param command -l "udp:$tcp_port"
@ -216,12 +226,13 @@ start_et() {
 		[ "$disable_ipv6" = "0" ] || procd_append_param command --disable-ipv6
 		[ "$latency_first" = "0" ] || procd_append_param command --latency-first
 		[ "$exit_node" = "0" ] || procd_append_param command --enable-exit-node
-		[ "$log" = "1" ] && procd_append_param command --file-log-level "info" 
-		[ "$log" = "1" ] && procd_append_param command --file-log-dir "/tmp"
-		[ "$log" = "0" ] && procd_append_param command --file-log-level "off"
-                [ "$disable_p2p" = "0" ] || procd_append_param command --disable-p2p
-                [ "$relay_all" = "0" ] || procd_append_param command --relay-all-peer-rpc
-                [ -z "$socks_port" ] || procd_append_param command --socks5 "$socks_port"
+		[ "$log" = "off" ] || procd_append_param command --file-log-level "$log" 
+		[ "$log" = "off" ] || procd_append_param command --file-log-dir "/tmp"
+		[ "$log" = "off" ] && procd_append_param command --file-log-level "off"
+    [ "$disable_p2p" = "0" ] || procd_append_param command --disable-p2p
+    [ "$disable_udp" = "0" ] || procd_append_param command --disable-udp-hole-punching
+    [ "$relay_all" = "0" ] || procd_append_param command --relay-all-peer-rpc
+    [ -z "$socks_port" ] || procd_append_param command --socks5 "$socks_port"
 		[ ! -z "$instance_name" ] && ln -sf /tmp/easytier-${instance_name}.${date_time} /tmp/easytier.log
 		
 		procd_set_param limits core="unlimited"
@ -344,7 +355,7 @@ start_service() {
        fi
 	cputype=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
        [ -n "$(echo $cputype | grep -E "linux.*armv.*")" ] && cpucore="arm" 
-        [ -n "$(echo $cputype | grep -E "linux.*armv7.*")" ] && [ -n "$(cat /proc/cpuinfo | grep vfp)" ] && [ ! -d /jffs/clash ] && cpucore="armv7" 
+        [ -n "$(echo $cputype | grep -E "linux.*armv7.*")" ] && [ -n "$(cat /proc/cpuinfo | grep vfp)" ] && cpucore="armv7" 
        [ -n "$(echo $cputype | grep -E "linux.*aarch64.*|linux.*armv8.*")" ] && cpucore="aarch64" 
        [ -n "$(echo $cputype | grep -E "linux.*86.*")" ] && cpucore="i386" 
        [ -n "$(echo $cputype | grep -E "linux.*86_64.*")" ] && cpucore="x86_64" 
@ -378,7 +389,7 @@ stop_service() {
                [ -n "$(uci changes network)" ] && uci commit network && /etc/init.d/network reload >/dev/null 2>&1
 	        [ -n "$(uci changes firewall)" ] && uci commit firewall && /etc/init.d/firewall reload >/dev/null 2>&1 
                rm -rf /tmp/easytier-cli_peer /tmp/easytier-cli_connector /tmp/easytier-cli_stun /tmp/easytier-cli_route >/dev/null 2>&1
-                rm -rf /tmp/easytier-cli_peer-center /tmp/easytier-cli_vpn-portal /tmp/easytier_cmd >/dev/null 2>&1
+                rm -rf /tmp/easytier-cli_peer-center /tmp/easytier-cli_vpn-portal /tmp/easytier_cmd /tmp/easytier-cli_node >/dev/null 2>&1
                rm -rf /tmp/easytier-*.* /tmp/easytier.log >/dev/null 2>&1
                rm -rf /tmp/easytiernew.tag /tmp/easytier.tag >/dev/null 2>&1
                echo "$(date '+%Y-%m-%d %H:%M:%S') easytier : 停止运行" >>/tmp/easytier.log
--- a/luci-app-firewall/po/en/firewall.po
+++ b/luci-app-firewall/po/en/firewall.po
@ -3,8 +3,8 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2023-11-30 14:34+0000\n"
-"Last-Translator: rygle <pittos@post.com>\n"
+"PO-Revision-Date: 2024-08-26 11:25+0000\n"
+"Last-Translator: Kristoffer Grundström <swedishsailfishosuser@tutanota.com>\n"
 "Language-Team: English <https://hosted.weblate.org/projects/openwrt/"
 "luciapplicationsfirewall/en/>\n"
 "Language: en\n"
@ -12,7 +12,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 5.3-dev\n"
+"X-Generator: Weblate 5.7.1-dev\n"

 #: applications/luci-app-firewall/htdocs/luci-static/resources/view/firewall/rules.js:48
 msgid ""
@ -291,7 +291,7 @@ msgstr "Drop invalid packets"
 #: applications/luci-app-firewall/htdocs/luci-static/resources/view/firewall/rules.js:230
 #: applications/luci-app-firewall/htdocs/luci-static/resources/view/firewall/snats.js:209
 msgid "Enable"
-msgstr ""
+msgstr "Aktivera"

 #: applications/luci-app-firewall/htdocs/luci-static/resources/view/firewall/forwards.js:305
 msgid "Enable NAT Loopback"
--- a/luci-app-passwall2/luasrc/model/cbi/passwall2/client/acl_config.lua
+++ b/luci-app-passwall2/luasrc/model/cbi/passwall2/client/acl_config.lua
@ -202,6 +202,17 @@ o:value("default", translate("Use global config") .. "(" .. UDP_REDIR_PORTS .. "
 o:value("1:65535", translate("All"))
 o.validate = port_validate

+o = s:option(ListValue, "direct_dns_query_strategy", translate("Direct Query Strategy"))
+o.default = "UseIP"
+o:value("UseIP")
+o:value("UseIPv4")
+o:value("UseIPv6")
+o:depends({ node = "default",  ['!reverse'] = true })
+
+o = s:option(Flag, "write_ipset_direct", translate("Direct DNS result write to IPSet"), translate("Perform the matching direct domain name rules into IP to IPSet/NFTSet, and then connect directly (not entering the core). Maybe conflict with some special circumstances."))
+o.default = "1"
+o:depends({ node = "default",  ['!reverse'] = true })
+
 o = s:option(ListValue, "remote_dns_protocol", translate("Remote DNS Protocol"))
 o:value("tcp", "TCP")
 o:value("doh", "DoH")
@ -291,8 +302,4 @@ for k, v in pairs(nodes_table) do
 	end
 end

-o = s:option(Flag, "write_ipset_direct", translate("Direct DNS result write to IPSet"), translate("Perform the matching direct domain name rules into IP to IPSet/NFTSet, and then connect directly (not entering the core). Maybe conflict with some special circumstances."))
-o.default = "1"
-o:depends({ node = "default",  ['!reverse'] = true })
-
 return m
--- a/luci-app-passwall2/root/usr/share/passwall2/app.sh
+++ b/luci-app-passwall2/root/usr/share/passwall2/app.sh
@ -337,7 +337,7 @@ run_xray() {
 			[ -n "${direct_ipset}" ] && _extra_param="${_extra_param} -direct_ipset ${direct_ipset}"
 			[ -n "${direct_nftset}" ] && _extra_param="${_extra_param} -direct_nftset ${direct_nftset}"
 		}
-		_extra_param="${_extra_param} -direct_dns_udp_port ${DIRECT_DNS_UDP_PORT} -direct_dns_udp_server ${DIRECT_DNS_UDP_SERVER} -direct_dns_query_strategy UseIP"
+		_extra_param="${_extra_param} -direct_dns_udp_port ${DIRECT_DNS_UDP_PORT} -direct_dns_udp_server ${DIRECT_DNS_UDP_SERVER} -direct_dns_query_strategy ${direct_dns_query_strategy}"
 		
 		DNS_REMOTE_ARGS=""
 		case "$remote_dns_protocol" in
--- a/luci-app-passwall2/root/usr/share/passwall2/rule_update.lua
+++ b/luci-app-passwall2/root/usr/share/passwall2/rule_update.lua
@ -108,14 +108,14 @@ local function fetch_geosite()
 		local json = jsonc.parse(content)
 		if json.tag_name and json.assets then
 			for _, v in ipairs(json.assets) do
-				if v.name and v.name == "geosite.dat.sha256sum" then
+				if v.name and (v.name == "geosite.dat.sha256sum" or v.name == "dlc.dat.sha256sum") then
 					local sret = curl(v.browser_download_url, "/tmp/geosite.dat.sha256sum")
 					if sret == 200 then
 						local f = io.open("/tmp/geosite.dat.sha256sum", "r")
 						local content = f:read()
 						f:close()
 						f = io.open("/tmp/geosite.dat.sha256sum", "w")
-						f:write(content:gsub("geosite.dat", "/tmp/geosite.dat"), "")
+						f:write(content:gsub("[^%s]+.dat", "/tmp/geosite.dat"), "")
 						f:close()

 						if nixio.fs.access(asset_location .. "geosite.dat") then
@ -126,7 +126,7 @@ local function fetch_geosite()
 							end
 						end
 						for _2, v2 in ipairs(json.assets) do
-							if v2.name and v2.name == "geosite.dat" then
+							if v2.name and (v2.name == "geosite.dat" or v2.name == "dlc.dat") then
 								sret = curl(v2.browser_download_url, "/tmp/geosite.dat")
 								if luci.sys.call('sha256sum -c /tmp/geosite.dat.sha256sum > /dev/null 2>&1') == 0 then
 									luci.sys.call(string.format("mkdir -p %s && cp -f %s %s", asset_location, "/tmp/geosite.dat", asset_location .. "geosite.dat"))
--- a/mihomo/Makefile
+++ b/mihomo/Makefile
@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=mihomo
-PKG_RELEASE:=45
+PKG_RELEASE:=46

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/MetaCubeX/mihomo.git
-PKG_SOURCE_DATE:=2024-08-29
-PKG_SOURCE_VERSION:=38fd37108b22b0e937cae7743c562a2147c65cca
+PKG_SOURCE_DATE:=2024-08-30
+PKG_SOURCE_VERSION:=08ac9a3fae545d521626ecb6cb9b290e51a394b0
 PKG_MIRROR_HASH:=skip

 PKG_LICENSE:=MIT
--- a/my-default-settings/Makefile
+++ b/my-default-settings/Makefile
@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk

 PKG_NAME:=my-default-settings
 PKG_VERSION:=1
-PKG_RELEASE:=265
+PKG_RELEASE:=266

 include $(INCLUDE_DIR)/package.mk

--- a/my-default-settings/files/etc/uci-defaults/99-default-settings
+++ b/my-default-settings/files/etc/uci-defaults/99-default-settings
@ -66,70 +66,11 @@ if [[ ! "$version" || "$version" -lt 1 ]]; then
 	uci commit upnpd
 	
 	(echo "root"; sleep 1; echo "root") | /bin/busybox passwd root >/dev/null 2>&1 &
-	
-	. /etc/openwrt_release

 		uci -q set firewall.@defaults[0].flow_offloading='1'
 		uci -q set firewall.@defaults[0].flow_offloading_hw='1'
 		uci commit firewall

-	sed -i '/option disabled/d' /etc/config/wireless
-
-	wifi_setup_radio(){
-	local radio=$1
-	htmode="$(uci -q get wireless.${radio}.htmode)"
-	if uci -q get wireless.${radio} >/dev/null; then
-			uci -q del wireless.${radio}.disabled
-			uci -q set wireless.${radio}.country='US'
-			uci -q set wireless.${radio}.mu_beamformer='1'
-			uci -q set wireless.${radio}.cell_density='3'
-		
-		if [ "$(uci -q get wireless.${radio}.band)" = "5g" ]; then
-			uci -q set wireless.default_${radio}.ssid="${SSID}_5G"
-			if [[ "${htmode}" == HE* ]]; then   # AX
-				if [[ "$(board_name)" == *cr660x || "$(board_name)" == *ax9000 || "$DISTRIB_TARGET" == *ipq60xx ]]; then
-					uci -q set wireless.${radio}.htmode="HE80"
-					uci -q set wireless.${radio}.channel='157'
-				else
-					uci -q set wireless.${radio}.htmode="HE160"
-					uci -q set wireless.${radio}.channel='44'
-				fi
-			else
-				uci -q set wireless.${radio}.htmode="VHT80"   #AC
-				uci -q set wireless.${radio}.channel="157"
-			fi
-			if [[ "$(board_name)" == *ax6000 ]]; then
-				uci -q set wireless.${radio}.htmode="VHT160"
-			fi
-		else
-			uci -q set wireless.${radio}.htmode="HT40"   #N
-			uci -q set wireless.${radio}.noscan='1'
-			uci -q set wireless.${radio}.vendor_vht='1'
-			uci -q set wireless.default_${radio}.ssid="${SSID}_2.4G"
-			uci -q set wireless.${radio}.channel='6'
-		fi
-			uci -q set wireless.default_${radio}.device="${radio}"
-			if [ "${SSID_PASSWD}" ]; then
-				uci -q set wireless.default_${radio}.encryption='psk2'
-				uci -q set wireless.default_${radio}.key="${SSID_PASSWD}"
-			else
-				uci -q set wireless.default_${radio}.encryption='none'
-			fi
-		fi
-	}
-
-	if [[ -f /etc/config/wireless ]]; then
-		SSID=${hostname}
-		SSID_PASSWD=""
-		[ "$(uci -q get wireless.radio1.band)" == "5g" ] && uci -q set wireless.radio0.band="2g"
-		widx=0
-		while uci rename wireless.@wifi-iface[$widx]=default_radio$widx >/dev/null 2>&1; do widx=$((widx+1)); done
-		for radio in radio0 radio1 radio2 radio3; do
-			wifi_setup_radio ${radio}
-		done
-		uci commit wireless
-	fi
-
 	uci -q set upnpd.config.enabled='1'
 	uci commit upnpd
 	
--- a/my-default-settings/files/sbin/mywifi
+++ b/my-default-settings/files/sbin/mywifi
@ -0,0 +1,65 @@
+#!/bin/sh
+
+. /etc/openwrt_release
+board_name() {
+	[ -e /tmp/sysinfo/board_name ] && cat /tmp/sysinfo/board_name || echo "generic"
+}
+SSID="$(uci -q get wizard.default.wifi_ssid || uci -q get system.@system[0].hostname || echo Kwrt)"
+SSID_PASSWD="$(uci -q get wizard.default.wifi_key)"
+
+sed -i '/option disabled/d' /etc/config/wireless
+
+	wifi_setup_radio(){
+	local radio=$1
+	htmode="$(uci -q get wireless.${radio}.htmode)"
+	if uci -q get wireless.${radio} >/dev/null; then
+			uci -q del wireless.${radio}.disabled
+			uci -q set wireless.${radio}.country='US'
+			uci -q set wireless.${radio}.mu_beamformer='1'
+			uci -q set wireless.${radio}.cell_density='3'
+		
+		if [ "$(uci -q get wireless.${radio}.band)" = "5g" ]; then
+			uci -q set wireless.default_${radio}.ssid="${SSID}_5G"
+			if [[ "${htmode}" == HE* ]]; then   # AX
+				if [[ "$(board_name)" == *cr660x || "$(board_name)" == *ax9000 || "$DISTRIB_TARGET" == *ipq60xx ]]; then
+					uci -q set wireless.${radio}.htmode="HE80"
+					uci -q set wireless.${radio}.channel='157'
+				else
+					uci -q set wireless.${radio}.htmode="HE160"
+					uci -q set wireless.${radio}.channel='44'
+				fi
+			else
+				uci -q set wireless.${radio}.htmode="VHT80"   #AC
+				uci -q set wireless.${radio}.channel="157"
+			fi
+			if [[ "$(board_name)" == *ax6000 ]]; then
+				uci -q set wireless.${radio}.htmode="VHT160"
+			fi
+		else
+			uci -q set wireless.${radio}.htmode="HT40"   #N
+			uci -q set wireless.${radio}.noscan='1'
+			uci -q set wireless.${radio}.vendor_vht='1'
+			uci -q set wireless.default_${radio}.ssid="${SSID}_2.4G"
+			uci -q set wireless.${radio}.channel='6'
+		fi
+			uci -q set wireless.default_${radio}.device="${radio}"
+			if [ "${SSID_PASSWD}" ]; then
+				uci -q set wireless.default_${radio}.encryption='psk2'
+				uci -q set wireless.default_${radio}.key="${SSID_PASSWD}"
+			else
+				uci -q set wireless.default_${radio}.encryption='none'
+			fi
+		fi
+	}
+
+	if [[ -f /etc/config/wireless ]]; then
+		SSID=${hostname}
+		SSID_PASSWD=""
+		[ "$(uci -q get wireless.radio1.band)" == "5g" ] && uci -q set wireless.radio0.band="2g"
+		widx=0
+		while uci rename wireless.@wifi-iface[$widx]=default_radio$widx >/dev/null 2>&1; do widx=$((widx+1)); done
+		for radio in radio0 radio1 radio2 radio3; do
+			wifi_setup_radio ${radio}
+		done
+		uci commit wireless
+	fi
--- a/tun2socks/Makefile
+++ b/tun2socks/Makefile
@ -2,11 +2,11 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=tun2socks
 PKG_VERSION:=2.5.2
-PKG_RELEASE:=4
+PKG_RELEASE:=5

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/xjasonlyu/tun2socks.git
-PKG_SOURCE_VERSION:=601601a1dc3accfce53032716e10dafe34df3d2e
+PKG_SOURCE_VERSION:=1f09b4d42d08b3a1292c5d5dfeff040969a1e56c

 PKG_MAINTAINER:=Konstantine Shevlakov <shevlako@132lan.ru>
 PKG_LICENSE:=GPL-3.0
--- a/wifi-scripts/Makefile
+++ b/wifi-scripts/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=wifi-scripts
 PKG_VERSION:=1.0
-PKG_RELEASE:=10
+PKG_RELEASE:=11
 PKG_LICENSE:=GPL-2.0

 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
--- a/wifi-scripts/files/sbin/wifi
+++ b/wifi-scripts/files/sbin/wifi
@ -185,7 +185,7 @@ wifi_config() {
 	done
 	[ ! -f /etc/config/wireless ] && touch /etc/config/wireless
 	ucode /lib/wifi/mac80211.uc | uci -q batch
-
+	. /sbin/mywifi
 	for driver in $DRIVERS; do (
 		if eval "type detect_$driver" 2>/dev/null >/dev/null; then
 			eval "detect_$driver" || echo "$driver: Detect failed" >&2