- Revert "pud: fix build with gpsd >= 3.23.1"
- lib/pud/src/gpsdclient.c: drop handling of gpsdata->fix.status
Signed-off-by: Nick Hainke <vincent@systemli.org>
The gpsd integration in the pud library is wrong. With the new update
the library is no longer compiling. Remove this library.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Compile time changes reviewed by cjd.
Due to stricter compiler(s) we do not
want to error for these warnings.
Caused by: ...reading "past the end"
of a struct, because the struct is
actually a header and the body is of
unknown size. Compilers got stricter
and this became a warning.
Signed-off-by: William Fleurant <meshnet@protonmail.com>
For some reason the buffer is initialized twice before filling it.
This does not break anything but is useless. Reduce the initialization
to only one.
Signed-off-by: Nick Hainke <vincent@systemli.org>
As Felix mentioned:
If a buffer was already allocated, blob_buf_init reuses it. You can
keep reusing it as many times as you want. You only need to call
blob_buf_free if you explicitly want to free the buffer memory
(e.g. on exit, or if the blob_buf is on stack).
http://lists.openwrt.org/pipermail/openwrt-devel/2021-October/036722.html
This PR frees the blob-buffers that are on the stack.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Wait for wireless to initialize (pending="false") to ensure
that any olsrd(6) configured interfaces and their associated
devices are up. This provides the init script the ability
to properly add all interface sections to the generated
config file /tmp/etc/olsrd(6).conf
Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
Sometimes, naywatch can not handover the watchdog to procd again using
ubus. We need to call the same ubus command multiple times until procd
takes over control again.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0, 19.07.8
Description:
This version adds new functionality, and fixes some issues
* Add - Error message in fas-aes-https if shared key is mismatched [bluewave.net]
* Fix - and refactor error 511 page generation[bluewave.net]
* Fix - and refactor dnsmasq configuration [bluewave.net]
* Fix - Typographic error preventing RFC8910 disable [bluewave.net]
* Add - gateway address and gatewayfqdn to ndsctl json output [bluewave.net]
* Add - RFC8910 housekeeping on startup and shutdown [bluewave.net]
* Add - correctly apply dhcp option 114 for generic Linux [bluewave.net]
* Add - reading of configured ndsctlsocket in ndsctl utility[bluewave.net]
* Add - use send_error 200 for MHD watchdog [bluewave.net]
* Add - generation of page_511 html by library script [bluewave.net]
* Add - extend debuglevel support to library scripts [bluewave.net]
* Refactor - fas-aes-https to simplify and make customisation of http easier [bluewave.net]
* Add - library script for error 511 page, allowing customisation [bluewave.net]
* Add - make authmon report connection error details [bluewave.net]
* Fix- remove unwanted debug message in ndsctl [bluewave.net]
* Add - RFC8910 support by default [bluewave.net]
* Add - display status page when accessing /login when authenticated [bluewave.net]
* Add - MHD response to RFC8910 requests [bluewave.net]
* Add - Dnsmasq RFC8910 configuration [bluewave.net]
* Add - send error 511 in response to unsupported http method [bluewave.net]
* Add - Check for ca-bundle on OpenWrt, if not installed, add syslog messages and terminate [bluewave.net]
* Add - Make ndsctl use the configured value for socket path if set and deprecate -s option [bluewave.net]
* Add - Warning message when Walled Garden port 80 is allowed [bluewave.net]
* Fix - remove un-needed pthread_kill in termination_handler() [bluewave.net] [T-X]
* Fix - debug messages from authmon.sh [bluewave.net]
* Fix - Allow disabling gateway fqdn, facilitating access to router port 80 [bluewave.net]
* Fix - Segfault in ndsctl when -s option is used incorrectly [bluewave.net] [T-X]
* Fix - Typo making calculation of ul/dl rates incorrect [bluewave.net]
* Fix - Allow port 80 to be configured in the Walled Garden [bluewave.net]
Signed-off-by: Rob White <rob@blue-wave.net>
The linux kernel 5.10 needs an explicit include of linux/if_bridge.h to
define br_multicast_list_adjacent and the struct br_ip_list.
Reported-by: Rosen Penev <rosenp@gmail.com>
Fixes: 47cd2a4b62 ("batman-adv: update to version 2021.2")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The test builds are now requiring quilt refreshed patches instead of git
patches. Otherwise the build check will not even try to build something.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Since https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=4b9a67362d70c544b85078b8d5c661f43f7472d9,
uci network config interface sections use 'device' instead of 'ifname'
Even if 'device' seems to always be set by
package/base-files/files/bin/config_generate, we keep the fallbacks
in case someone install the package via opkg and has a non migrated
network config
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
On a Netgear R7800, if ospf v2 or v3 is configured in bird.conf, it fails to start with this error:
Fri Jun 11 14:41:11 2021 daemon.info bird: Started
Fri Jun 11 14:41:11 2021 kern.err kernel: [ 3500.853248] Alignment trap: not handling instruction f44c0a1f at [<00035848>] Fri Jun 11 14:41:11 2021 kern.alert kernel: [ 3500.853283] 8<--- cut here ---
Fri Jun 11 14:41:11 2021 kern.alert kernel: [ 3500.859363] Unhandled fault: alignment exception (0x801) at 0x007e0624
Fri Jun 11 14:41:11 2021 kern.alert kernel: [ 3500.862443] pgd = 0bbef4fd
Fri Jun 11 14:41:11 2021 kern.alert kernel: [ 3500.868821] [007e0624] *pgd=5d6ca835, *pte=5c40b75f, *ppte=5c40bc7f
The problem is due to a struct not being properly aligned on the ARMv7 architecture.
This patch fixes the problem by adding the "PACKED" macro to the affected struct. Note
that upstream may later fix this in another way, in which case this patch will not be required.
Signed-off-by: Matt Reeve <matt@mreeve.com>
(cherry picked from commit 166b6ea77b)
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0-rc3, 19.07.7
Description:
This version adds new functionality, and fixes some issues
* Add - firewall passthrough mode for authenticated users [bluewave.net]
* Add - use configured debuglevel in authmon [bluewave.net]
* Add - automated log rotation and client_zone to binauth_log [bluewave.net]
* Add - increased timeout interval for file downloads [bluewave.net]
* Add - local interface to MeshZone and remove unneeded call to ip utility [bluewave.net]
* Add - log_mountpoint and max_log_entries options [bluewave.net]
* Add - config variables ext_interface and ext_gateway [bluewave.net]
* Add - Start initial download of remotes only if online [bluewave.net]
* Add - Router online/offline watchdog [bluewave.net]
* Fix - Segfault when gatewayfqdn is disabled [bluewave.net]
* Fix - missing clientmac when not using themespec [bluewave.net]
* Fix - some compiler warnings [bluewave.net]
* Fix - use configured value for webroot for remote image symlink to images folder [bluewave.net]
* Fix - remove refrences to login.sh in documentation and comments [bluewave.net]
* Fix - Prevent potential read overrun within the MHD page buffer [bluewave.net]
* Remove - legacy get_ext_iface() function [bluewave.net]
Signed-off-by: Rob White <rob@blue-wave.net>
The network may crash on the SoCs, but the SoC itself does not. This
leads to a node no longer being accessible in a mesh network. If the
node is placed in a location that is not easily accessible, e.g. in a
high tower, it can cause a lot of problems. Therefore we check the
link-local connectivity on the configured interfaces.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Tested-by: Simon Polack <spolack+git@mailbox.org>
Signed-off-by: Simon Polack <spolack+git@mailbox.org>
This increases the amount of seconds to wait before a service restart
attempt from 5 to 15 seconds and allows unlimited retries. Olsrd
sometimes crashes together with a network interface and 5 seconds can
be too short to bring back up a crashed network interface, which is
required for olsrd to restart. It also adds the ability to configure
the wait time (respawn_timeout) and the number of retries
(respawn_retry).
Signed-off-by: Tobias Schwarz <info@tobias-schwarz.com>
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0-rc3, 19.07.7
Description:
This version adds new functionality, improves performance, adds documentation and fixes an issue
* Add - new config options to ndsctl status [bluewave.net]
* Add - Readthedocs / man documentation for configuration options [bluewave.net]
* Add - Faster convergence of average rates to configured rate quotas [bluewave.net]
* Add - BinAuth parse authenticated client database for client data [bluewave.net]
* Add - Use heap allocation for http page buffer allowing large page sizes [bluewave.net]
* Fix - fail to serve downloaded images on custom themespec [bluewave.net]
Signed-off-by: Rob White <rob@blue-wave.net>
This script originates from Freifunk Berlin. It prints a list of
all meshing neighbors known to olsrd on the command line.
Added: Error-checking for IPv4/IPv6-Hosts.
Signed-off-by: Martin Hübner <martin.hubner@web.de>
Should fix#691.
Sometimes the wifi interface is not ready before olsrd tries to access
it. This leads to warnings in the form of:
daemon.info olsrd: /etc/rc.d/S65olsrd: olsrd_write_interface()
Warning: Interface 'wireless0' not found, skipped
daemon.notice procd: /etc/rc.d/S65olsrd: olsrd: /etc/rc.d/S65olsrd:
olsrd_write_interface() Warning: Interface 'wireless0' not found, skipped
We make use of the "wait_for" procd command that allows us to wait for
the network before starting olsrd.
Tested-by: Noki
Signed-off-by: Nick Hainke <vincent@systemli.org>
Maintainer: Rob White rob@blue-wave.net
Compile tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, gl-inet b1300, gl-inet mt300n-v2, Snapshot, 21.02.0-rc3, 19.07.7
Description:
This version fixes a compiler error, some compiler warnings and mutes a debug message
* Fix - Compiler error, missing mode in call to open() [bluewave.net]
* Fix - Compiler warning, ignored return value from call to lockf() [bluewave.net]
* Fix - Compiler warning, ignored return value from call to system() [bluewave.net]
* Fix - Compiler warning, ignored return value from call to fgets() [bluewave.net]
* Fix - Remove debug message from call to get_client_interface library [bluewave.net]
Signed-off-by: Rob White <rob@blue-wave.net>
The repository path changed and the information to manually add the feed
is outdated, since it enabled by default.
Also use Markdown to format the README since it looks much more
appealing.
Signed-off-by: Paul Spooren <mail@aparcar.org>
As a workaround for the glibc-fix the dependency on libgps was moved
to olsrd. However, only pud is using this library.
Signed-off-by: Nick Hainke <vincent@systemli.org>
The plugin adds a possibility to filter out gateway HNAs. This can be
very handy e.g. for faulty nodes. A gateway can be taken out directly on
a central node and all traffic is then redirected. Also the underlying
smart gateways are adapted. Currently the link multiplier is often used
to control a faulty node, but it is not necessarily the best way to do
so.
Signed-off-by: Nick Hainke <vincent@systemli.org>
