openwrt-feed-routing/babeld/files/babeld.init

#!/bin/sh /etc/rc.common

. $IPKG_INSTROOT/lib/functions/network.sh

USE_PROCD=1
START=70

CONFIGFILE='/var/etc/babeld.conf'
OTHERCONFIGFILE="/etc/babeld.conf"
OTHERCONFIGDIR="/tmp/babeld.d/"
EXTRA_COMMANDS="status"
EXTRA_HELP="        status Dump Babel's table to the log file."

# Append a line to the configuration file
cfg_append() {
        local value="$1"
        echo "$value" >> "$CONFIGFILE"
}

cfg_append_option() {
	local section="$1"
	local option="$2"
	local value
	config_get value "$section" "$option"
	# babeld convention for options is '-', not '_'
	[ -n "$value" ] && cfg_append "${option//_/-} $value"
}

# Append to the "$buffer" variable
append_ifname() {
	local section="$1"
	local option="$2"
	local switch="$3"
	local _name
	config_get _name "$section" "$option"
	[ -z "$_name" ] && return 0
	local ifname=$(uci_get_state network "$_name" ifname "$_name")
	append buffer "$switch $ifname"
}

append_bool() {
	local section="$1"
	local option="$2"
	local value="$3"
	local _loctmp
	config_get_bool _loctmp "$section" "$option" 0
	[ "$_loctmp" -gt 0 ] && append buffer "$value"
}

append_parm() {
	local section="$1"
	local option="$2"
	local switch="$3"
	local _loctmp
	config_get _loctmp "$section" "$option"
	[ -z "$_loctmp" ] && return 0
	append buffer "$switch $_loctmp"
}

babel_filter() {
	local cfg="$1"
	local _loctmp

	local _ignored
	config_get_bool _ignored "$cfg" 'ignore' 0
	[ "$_ignored" -eq 1 ] && return 0

	unset buffer
	append_parm "$cfg" 'type' ''

	append_bool "$cfg" 'local' 'local'

	append_parm "$cfg" 'ip' 'ip'
	append_parm "$cfg" 'eq' 'eq'
	append_parm "$cfg" 'le' 'le'
	append_parm "$cfg" 'ge' 'ge'
	append_parm "$cfg" 'src_ip' 'src-ip'
	append_parm "$cfg" 'src_eq' 'src-eq'
	append_parm "$cfg" 'src_le' 'src-le'
	append_parm "$cfg" 'src_ge' 'src-ge'
	append_parm "$cfg" 'neigh' 'neigh'
	append_parm "$cfg" 'id' 'id'
	append_parm "$cfg" 'proto' 'proto'

	append_ifname "$cfg" 'if' 'if'

	append_parm "$cfg" 'action' ''

	cfg_append "$buffer"
}

# Only one of babeld's options is allowed multiple times, "import-table".
# We just append it multiple times.
list_cb() {
	option_cb "$@"
}

babel_config_cb() {
	local type="$1"
	local section="$2"
	case "$type" in
	"general")
		option_cb() {
			local option="$1"
			local value="$2"
			# Ignore options that are not supposed to be given to babeld
			[ "$option" = "conf_file" ] && return
			[ "$option" = "conf_dir" ] && return
			# Skip lists. They will be taken care of by list_cb
			test "${option#*_ITEM}" != "$option" && return
			test "${option#*_LENGTH}" != "$option" && return
			cfg_append "${option//_/-} $value"
		}
	;;
	"interface")
		local _ifname
		config_get _ifname "$section" 'ifname'
		# Try to resolve the logical interface name
		unset interface
		network_get_device interface "$_ifname" || interface="$_ifname"
		option_cb() {
			local option="$1"
			local value="$2"
			local _interface
			# "option ifname" is a special option, don't actually
			# generate configuration for it.
			[ "$option" = "ifname" ] && return
			[ -n "$interface" ] && _interface="interface $interface" || _interface="default"
			cfg_append "$_interface ${option//_/-} $value"
		}
		# Handle ignore options.
		local _ignored
		# This works because we loaded the whole configuration
		# beforehand (see config_load below).
		config_get_bool _ignored "$section" 'ignore' 0
		if [ "$_ignored" -eq 1 ]
		then
			option_cb() { return; }
		else
			# Also include an empty "interface $interface" statement,
			# so that babeld operates on this interface.
			[ -n "$interface" ] && cfg_append "interface $interface"
		fi
	;;
	*)
		# Don't use reset_cb, this would also reset config_cb
		option_cb() { return; }
	;;
	esac
}

# Support for conf_file and conf_dir
babel_configpaths() {
	local cfg="$1"
	local conf_file
	config_get conf_file "$cfg" "conf_file"
	[ -n "$conf_file" ] && OTHERCONFIGFILE="$conf_file"
	local conf_dir
	config_get conf_dir "$cfg" "conf_dir"
	[ -n "$conf_dir" ] && OTHERCONFIGDIR="$conf_dir"
}

start_service() {
	mkdir -p /var/lib
	mkdir -p /var/etc

	# First load the whole config file, without callbacks, so that we are
	# aware of all "ignore" options in the second pass.  This also allows
	# to load the configuration paths (conf_file and conf_dir).
	config_load babeld

	# Configure alternative configuration file and directory
	config_foreach babel_configpaths "general"

	# Start by emptying the generated config file
	>"$CONFIGFILE"
	# Import dynamic config files
	mkdir -p "$OTHERCONFIGDIR"
	for f in "$OTHERCONFIGDIR"/*.conf; do
		[ -f "$f" ] && cat "$f" >> "$CONFIGFILE"
	done

	# Parse general and interface sections thanks to the "config_cb()"
	# callback.  This allows to loop over all options without having to
	# know their name in advance.
	config_cb() { babel_config_cb "$@"; }
	config_load babeld
	# Parse filters separately, since we know which options we expect
	config_foreach babel_filter filter
	procd_open_instance
	# Using multiple config files is supported since babeld 1.5.1
	procd_set_param command /usr/sbin/babeld -I "" -c "$OTHERCONFIGFILE" -c "$CONFIGFILE"
	procd_set_param stdout 1
	procd_set_param stderr 1
	procd_set_param file "$OTHERCONFIGFILE" "$OTHERCONFIGDIR"/*.conf "$CONFIGFILE"
	procd_set_param respawn
	procd_close_instance
}

service_triggers() {
	procd_add_reload_trigger babeld
}

status() {
	kill -USR1 $(pgrep -P 1 babeld)
}